-Improve performance in the following variations: cpow2, dc_cube, julia3d, julia3dz, julian2, log_db, nblur, npolar, waffle, wavesn, xtrb.
--Code changes
-Rand range now uses multiply + shift rather than modulo.
-Fix xform selection logic to prevent selecting hidden pre and post xforms.
-Add hex_modulus.
--Bug fixes
-starblur was wrong.
--Code changes
-Optimize Truchet_hex_crop, Truchet_hex_fill.
-Cleanup Truchet_inv.
-Add new file Variations08.h, and move Gnarly and inkdrop there.
-cosh, coth, csch, sech, sinh, tanh: Scale inputs by PI/4. This will produce different results, but is technically more correct.
--Code changes
-cos, csch: move position of sign flip, shouldn't change output.
-cot, coth, csc, csch, sec, sech, tan, tanh: add optimization.
-Add new variations waves22, waves23, waves42, waves3 and waves4 from user tatasz.
-Add new stylesheet called lightdark.qss which gives a more modern look to the dark theme. Started by Michel Mastriani (triptychaos).
--Included in the qmake and Wix installers.
--Code changes
-Add a new C# project that attempts to convert Apophysis plugins to Fractorium style Variation classes. It's not entirely perfect, but gets most of the job done much more quickly than doing so manually.
-Remove unused OpenCL functions from variations: elliptic, poincare, mask, bMod, bSwirl, bTransform, bCollide, farblur, popcorn2_3D, falloff, falloff2, falloff3, crackle2, waves2b, hypercrop, depth_gaussian2, depth_sine, depth_sine2, dust, asteria, vibration, vibration2, arctanh, smartshape, squares, starblur2, Truchet,.
-Add code in EmberTester to automatically detect such unused functions.
-Clear all color curves when clicking Reset while holding down Ctrl.
-Interpolate color curves when generating a sequence.
--Bug fixes
-Undo a change made last year which gave the wrong color index for final xforms when generating a sequence.
--Code changes
-No longer assume palettes are 256 elements. Can now read longer palettes.
-Ensure OpenCL images always get written when created.
-Clear all color curves when clicking Reset while holding down Ctrl.
--Code changes
-No longer assume palettes are 256 elements. Can now read and write longer palettes.
-Ensure OpenCL images always get written when created.
-Show common folder locations such as documents, downloads, pictures in the sidebar in all file dialogs.
-Warning message about exceeding memory in final render dialog now suggests strips as the solution to the problem.
-Strips now has a tooltip explaining what it does.
-Allow more digits in the spinners on the color section the flame tab.
-Add manually adjustable size spinners in the final render dialog. Percentage scale and absolute size are fully synced.
-Default prefix in final render is now the filename when doing animations (coming from sequence section of the library tab).
-Changed the elliptic variation back to using a less precise version for float, and a more precise version for double. The last release had it always using double.
-New applied xaos table that shows a read-only view of actual weights by taking the base xform weights and multiplying them by the xaos values.
-New table in the xaos tab that gives a graphical representation of the probability that each xform is chosen, with and without xaos.
-Add button to transpose the xaos rows and columns.
-Add support for importing .chaos files from Chaotica.
--Pasting back to Chaotica will work for most, but not all, variations due to incompatible parameter names in some.
-Curves are now splines instead of Bezier. This adds compatibility with Chaotica, but breaks it for Apophysis. Xmls are still pastable, but the color curves will look different.
--The curve editor on the palette tab can now add points by clicking on the lines and remove points by clicking on the points themselves, just like Chaotica.
--Splines are saved in four new xml fields: overall_curve, red_curve, green_curve and blue_curve.
-Allow for specifying the percentage of a sub batch each thread should iterate through per kernel call when running with OpenCL. This gives a roughly 1% performance increase due to having to make less kernel calls while iterating.
--This field is present for interactive editing (where it's not very useful) and in the final render dialog.
--On the command line, this is specified as --sbpctth for EmberRender and EmberAnimate.
-Allow double clicking to toggle the supersample field in the flame tab between 1 and 2 for easily checking the effect of the field.
-When showing affine values as polar coordinates, show angles normalized to 360 to match Chaotica.
-Fuse Count spinner now toggles between 15 and 100 when double clicking for easily checking the effect of the field.
-Added field for limiting the range in the x and y direction that the initial points are chosen from.
-Added a field called K2 which is an alternative way to set brightness, ignored when zero.
--This has no effect for many variations, but hs a noticeable effect for some.
-Added new variations:
arcsech
arcsech2
arcsinh
arctanh
asteria
block
bwraps_rand
circlecrop2
coth_spiral
crackle2
depth_blur
depth_blur2
depth_gaussian
depth_gaussian2
depth_ngon
depth_ngon2
depth_sine
depth_sine2
dragonfire
dspherical
dust
excinis
exp2
flipx
flowerdb
foci_p
gaussian
glynnia2
glynnsim4
glynnsim5
henon
henon
hex_rand
hex_truchet
hypershift
lazyjess
lens
lozi
lozi
modulusx
modulusy
oscilloscope2
point_symmetry
pointsymmetry
projective
pulse
rotate
scry2
shift
smartshape
spher
squares
starblur2
swirl3
swirl3r
tanh_spiral
target0
target2
tile_hlp
truchet_glyph
truchet_inv
truchet_knot
unicorngaloshen
vibration
vibration2
--hex_truchet, hex_rand should always use double. They are extremely sensitive.
--Bug fixes:
-Bounds sign was flipped for x coordinate of world space when center was not zero.
-Right clicking and dragging spinner showed menu on mouse up, even if it was very far away.
-Text boxes for size in final render dialog were hard to type in. Same bug as xform weight used to be so fix the same way.
-Fix spelling to be plural in toggle color speed box.
-Stop using the blank user palette to generate flames. Either put colored palettes in it, or exclude it from randoms.
-Clicking the random palette button for a palette file with only one palette in it would freeze the program.
-Clicking none scale in final render did not re-render the preview.
-Use less precision on random xaos. No need for 12 decimal places.
-The term sub batch is overloaded in the options dialog. Change the naming and tooltip of those settings for cpu and opencl.
--Also made clear in the tooltip for the default opencl quality setting that the value is per device.
-The arrows spinner in palette editor appears like a read-only label. Made it look like a spinner.
-Fix border colors for various spin boxes and table headers in the style sheet. Requires reload.
-Fix a bug in the bwraps variation which would produce different results than Chaotica and Apophysis.
-Synth was allowed to be selected for random flame generation when using an Nvidia card but it shouldn't have been because Nvidia has a hard time compiling synth.
-A casting bug in the OpenCL kernels for log scaling and density filtering was preventing successful compilations on Intel iGPUs. Fixed even though we don't support anything other than AMD and Nvidia.
-Palette rotation (click and drag) position was not being reset when loading a new flame.
-When the xform circles were hidden, opening and closing the options dialog would improperly reshow them.
-Double click toggle was broken on integer spin boxes.
-Fixed tab order of some controls.
-Creating a palette from a jpg in the palette editor only produced a single color.
--Needed to package imageformats/qjpeg.dll with the Windows installer.
-The basic memory benchmark test flame was not really testing memory. Make it more spread out.
-Remove the temporal samples field from the flame tab, it was never used because it's only an animation parameter which is specified in the final render dialog or on the command line with EmberAnimate.
--Code changes:
-Add IsEmpty() to Palette to determine if a palette is all black.
-Attempt to avoid selecting a blank palette in PaletteList::GetRandomPalette().
-Add function ScanForChaosNodes() and some associated helper functions in XmlToEmber.
-Make variation param name correction be case insensitive in XmlToEmber.
-Report error when assigning a variation param value in XmlToEmber.
-Add SubBatchPercentPerThread() method to RendererCL.
-Override enterEvent() and leaveEvent() in DoubleSpinBox and SpinBox to prevent the context menu from showing up on right mouse up after already leaving the spinner.
-Filtering the mouse wheel event in TableWidget no longer appears to be needed. It was probably an old Qt bug that has been fixed.
-Gui/ember syncing code in the final render dialog needed to be reworked to accommodate absolute sizes.
-Disable Start button in final render dialog when Pause is clicked.
--Bug fixes
-Rapidly changing spinner values was causing the OpenCL renderer to report a failure, when it was really just aborting.
--Code changes
-Renderers never internally set abort to true due to a failure. Abort is only set to true by the calling code.
-Add new palettes from user Rubydeva.
--Bug fixes
-Avoid an occasional divide by zero in the OpenCL renderer when using the interactive editor.
--Code changes
-Use exact comparisons in IsID() and IsZero() in Affine2D.
-When testing for bad point values while iterating, only test for NaN now.
-For rendering with OpenCL on the command line and in the final render dialog, use an optimized kernel that does a direct assignment for any affines which are ID.
-Add buttons to copy and paste affine transforms.
-Show xform names on the column headers of the xaos table.
-Add a color-coded third column to the variations tree which shows any properties of each variation which are non-standard.
-Draw a transparent circle over hovered xforms.
-Change how xforms respond to dragging. Rotate only is now the default, and scale will only happen with shift.
--Optionally do scale and rotate when holding shift, via a setting in the options dialog.
--Bug fixes
-Snapping when dragging was wrong sometimes.
-The program would very rarely crash on startup due to some values being in an uninitialized state.
--Code changes
-Change almost every variation to use fma() in OpenCL when doing computations of the form a * b + c. This provides a slight speedup, mostly in double precision mode.
-Also apply fma() to affine calcs.
-Cleanup of OpenGL affine drawing code.
-Separate the concept of hovering and selecting xforms.
-Give tabs a height of 4px in the qss files. Looks a little large on 4k screens, but just right on HD screens which are much more common.
-Allow for styling of zero and non-zero variation tree nodes via qss.
-Allow for toggling whether to interpolate between colors in the palette editor, or to do hard cuts between colors.
-Allow for adjusting spinner values with the + = or up arrow keys to increase, and - _ or down arrow keys to decrease.
-Allow for responding to global presses of + = and - _ to cycle up or down to specify which xform is set as the current one.
-Allow for adding "layers" via xaos which will add a user-specified number of xforms, and set certain xaos values to 0 or 1.
-Add a new menu item under the Edit menu to copy the OpenCL iteration kernel source to the clipboard.
-Show text on the status bar which indicates that an OpenCL kernel compilation is taking place.
-Show xform name on xform combo box when expanded. Adjust size to fit all names.
-Draw post affine circles using dashed lines.
-Prevent QSS dialog from styling its editor, which makes it easier to see text when creating styles which have custom colors for text boxes.
--Bug fixes
-Fix up some table layouts which seemed to have regressed/decayed over time for reasons unknown.
-Using undo/redo would create a new flame in the library every time.
-Solo was not being preserved when using undo/redo.
--Code changes
-Make the solo flag be a part of the flame data now.
-Fix some tabification in the OpenCL code for EllipticVariation.
-Fix tabification in the varState code for OpenCL.
-Add an event called m_CompileBegun to RendererCL that is called right before an OpenCL compile is begun.
--This required making RendererCLBase not a pure virtual base class. Member functions just return defaults.
-Filter key presses on main window to only process the third one. This is due to Qt triggering three events for every key press.
-The palette preview table was installing an event filter for seemingly no reason. Remove it.
-Mark certain virtual functions as override in SpinBox and DoubleSpinBox.
-No longer constrain pitch, yaw or depth spinners to -180 - 180.
--Bug fixes
-Properly set color index on padded xforms.
-Adding a padding final xform included a linear variation with a weight of zero to not appear empty. Made it have a weight of 1.
-Always write animate tag on final xform when saving to Xml.
-Motion was being applied to the wrong flame in SheepTools::Edge(), so apply it to the correct one.
-Prevent divide by zero when normalizing variation weights.
-Was accidentally adding the placeholder value of -9999 for motion_offset to varation weights and parameters when applying motion. Set to zero if no value present.
-Clamp flame rotation values to -180 - 180 when reading a flame from Xml.
-Events were not properly wired for user changes in the random rotations per blend controls in the sequencer.
-Fix major UI bugs with sequencer min/max random controls which made it nearly impossible to hand type values.
-Values from rotations per blend and rotations per blend max were not being saved to file between program runs.
-Checking animate for an xform was not applied to all flames even if Apply All was checked.
-Changing interpolation type, temporal filter width, temporal type, and affine interpolation type were not actually saving to the flame when changed.
-Grid on the main window was not being drawn at the right scale initially due to some OpenGL initialization occurring in the wrong order.
-Severe bugs in sequence generation code:
--Improperly detected padding xforms.
--When looking for specific variations during xform aligning, only presence was detected, when it should have been presence plus a weight greater than zero.
--When adding specific variations during xform aligning, must first remove any variations of that type.
--Two variables were unsigned when they should have been signed. This prevented large blocks of code from ever executing.
--When interpolating affines, an EPS that was too small was used, causing affine values to interpolate incorrectly. Instead use 1e-10 to ensure results equal to flam3.
--Code changes
-Modify FractoriumEmberController::UpdateXform() to pass the selected xform index as well as the absolute index to func().
-Add two new variations, hyperbolic and hypershift2.
-Allow for animating final xforms.
-More detailed diagnostics when any action in the OpenCL renderer fails.
-Allow for creating an OpenCL renderer which does not share a texture with the main window, and instead manually copies its final output image from GPU to CPU then back to GPU.
--Bug fixes
-Text was not properly being copied out of the Info | Bounds text box.
--Code changes
-Remove Renderer::AccumulatorToFinalImage(v4F* pixels, size_t finalOffset), it's no longer needed or makes sense.
-Controllers no longer keep track of shared status, it's kept inside the renderers.
-Make getter functions in FractoriumOptionsDialog be public.
-Convert OpenGL drawing code to use GLSL. Leave #define in until testing on multiple platforms is done.
-Always use double precision extension defines in OpenCL programs, even if DP is not selected. This is because elliptic now always uses DP.
-Support 4k monitors, and in general, properly scale any monitor that is not HD.
-Allow for a spatial filter of radius zero, which means do not use a spatial filter.
-Add new variations: concentric, cpow3, helicoid, helix, rand_cubes, sphereblur.
-Use a new method for computing elliptic which is more precise. Developed by Discord user Claude.
-Remove the 8 variation per xform limitation on the GPU.
-Allow for loading the last flame file on startup, rather than randoms.
-Use two different default quality values in the interactive renderer, one each for CPU and GPU.
-Creating linked xforms was using non-standard behavior. Make it match Apo and also support creating multiple linked xforms at once.
--Bug fixes
-No variations in an xform used to have the same behavior as a single linear variation with weight 1. While sensible, this breaks backward compatibility. No variations now sets the output point to zeroes.
-Prevent crashing the program when adjusting a value on the main window while a final render is in progress.
-The xaos table was inverted.
--Code changes
-Convert projects to Visual Studio 2017.
-Change bad vals from +- 1e10 to +-1e20.
-Reintroduce the symmetry tag in xforms for legacy support in programs that do not use color_speed.
-Compiler will not let us use default values in templated member functions anymore.
--Bug fixes
-Strips renders crashed.
-Better handling of large memory allocations by forcing a free of previous allocations.
-Final render dialog did not properly save last used extension setting.
-Density filtering progress bar in final render dialog did not update if only log scaling was being used.
--Added panorama1 and panorama2 variations.
Bug fixes:
--crackle had a bug with Nvidia GPUs.
Code changes:
--crackle now uses real_t* for cache rather than real2. This is what was causing the bug.
--Make the local offsets array used in crackle a precalc since it's the same for all. This reduces register pressure.
--Get rid of all usages of real3, just to be safe since Nvidia doesn't like them.
--#define TOTAL_GLOBAL_SIZE_END in the OpenCL iteration kernel just for debugging purposes to see how large the parvars buffer is.
--Disallow the use of synth when randomly generating xforms if the user has an Nvidia device present on their system.
Code changes:
--Use some CPU defines in CL code.
--Change curves color scaling buffer to be 2^16 per channel instead of 2^17 which was probably overkill.
--Code in RendererClDevice::Init() to detect Nvidia was wrong even thought it technically worked.
--Add support for Exr files which use 32-bit floats for each RGBA channel. Seems to come out too washed out.
--Allow for clearing an individual color curve.
--Allow for saving multiple image types in EmberRender and EmberAnimate. All writes are threaded.
--Remove --bpc command line argument. Add format png16 as a replacement.
--Remove --enable_jpg_comments and --enable_png_comments command line arguments, and replace them with --enable_comments which applies to jpg, png and exr.
--Add menu items to variations and affine spinners which allow for easy entry of specific numeric values like pi.
--Make final render dialog be wider rather than so tall.
Bug fixes:
--Fix some OpenCL compile errors on Mac.
--Remove ability to save bitmap files on all platforms but Windows.
Code changes:
--New dependency on OpenEXR.
--Allow Curves class to interact with objects of a different template type.
--Make m_Curves member of Ember always use float as template type.
--Set the length of the curves array to always be 2^17 which should offer enough precision with new 32-bit float pixel types.
--Set pixel types to always be 32-bit float. This results in a major reduction of code in the final accumulation part of Renderer.h/cpp.
--Remove corresponding code from RendererCL and FinalAccumOpenCLKernelCreator.
--Remove Transparency, NumChannels and BytesPerPixel setters from Renderer.h/cpp.
--Add new global functions to format final image buffers and place all alpha calculation and scaling code in them.
--Blending is no longer needed in OpenGLWidget because of the new pixel type.
--Make new class, AffineDoubleSpinBox.
--Attempt to make file save dialog code work the same on all OSes.
--Remove some unused functions.
-Attempt to fix several OpenCL build errors that were occurring on Mac.
--Code changes
-Improve the coloring code during final accum by getting rid of the last remnants of unnecessary scaling to 255 from flam3.
-Begin work of supporting 16bpc on the GPU.
--User changes
-dark.qss is now per-OS.
-Properly set/reload palette when coming from the palette editor. The latter must be done if they've modified the current palette even if they've clicked cancel.
--Bug fixes
-Make the following variations safer by using Zeps(): conic, bipolar, edisc, whorl, tan, csc, cot, tanh, sech, csch, coth, auger, bwraps, hypertile3d, hypertile3d1, ortho, poincare, rational3, barycentroid, sschecks, cscq, cschq, scry_3D, splitbrdr, hexcrop, nblur, crob.
-Fix bug enabling/disabling overwrite button in palette editor.
-Small optimization for gdoffs, use precalcAtanYX.
-Properly propagate z through circlesplit, cylinder2 and tile_log variations.
-Some values in truchet_fill could've been NaN.
--Code changes
-Make most installation files read only.
-Qualify many calls with std:: to ensure they're not colliding with glm::
-Use auto in more places.
--User changes
-Make all fonts be MS Shell Dlg 2. This will require reloading dark.qss if users are already using it.
-Limit size of the left side of the palette editor.
-Disable create from image buttons in the palette editor when working on a fixed palette.
--Bug fixes
-The following variations were wrong: coshq, cothq.
-During iteration, the color index could become nan if all xform color speeds were negative. This could lead to bad results on the GPU. Fix to check for nan. Minimal speed difference.
--Code changes
-Make the following variations safer by using Zeps(): sinq, sinhq, secq, sechq, tanq, tanhq, cosq, coshq, cotq, cothq, cscq, cschq, estiq.
-Always pass -cl-no-signed-zeros -cl-denorms-are-zero to kernel compiles for both single and double.
-Flush all denormals to zero for all executable programs. This will likely lead to a speedup for badly behaving programs.
--User changes
-Add support for adjusting xform color indices in the palette editor. Fixed palettes can now be displayed there, but they will have no color arrows as they are not editable.
-Add support for independent dimension scaling in the EmberRender and EmberAnimate programs to bring them in line with the final render dialog Fractorium.
--Bug fixes
-File paths with a space in them did not work in the command line programs.
-Any Xml file in the search paths would erroneously be treated as a palette file.
--Code changes
-Change some for loops to while loops when iterating through xforms.
-Allow FractoriumEmberController<T>::UpdateXform() to be able to apply the action to an xform at a specific index.
-Remove old code blocks build files that were never used.
-Make GetPath() return empty string if no path is present in the passed in file path.
-GetTotalXform() was always counting the final xform, even if it was unused.
-Bump to version 1.0.0.3
-Remove all code for opacity adjustment, it's no longer needed.
-Small optimization on accumulating to the histogram on the CPU.
-Xaos has been wrong this entire time on the GPU because it was not selecting from the unweighted distributions on the very first iteration when fusing.
-Add a palette editor.
-Add support for reading .ugr/.gradient/.gradients palette files.
-Allow toggling on spinners whose minimum value is not zero.
-Allow toggling display of image, affines and grid.
-Add new variations: cylinder2, circlesplit, tile_log, truchet_fill, waves2_radial.
--Bug fixes
-cpow2 was wrong.
-Palettes with rapid changes in color would produce slightly different outputs from Apo/Chaotica. This was due to a long standing bug from flam3.
-Use exec() on Apple and show() on all other OSes for dialog boxes.
-Trying to render a sequence with no frames would crash.
-Selecting multiple xforms and rotating them would produce the wrong rotation.
-Better handling when parsing flames using different encoding, such as unicode and UTF-8.
-Switching between SP/DP didn't reselect the selected flame in the Library tab.
--Code changes
-Make all types concerning palettes be floats, including PaletteTableWidgetItem.
-PaletteTableWidgetItem is no longer templated because all palettes are float.
-Include the source colors for user created gradients.
-Change parallel_for() calls to work with very old versions of TBB which are lingering on some systems.
-Split conditional out of accumulation loop on the CPU for better performance.
-Vectorize summing when doing density filter for better performance.
-Make all usage of palettes be of type float, double is pointless.
-Allow palettes to reside in multiple folders, while ensuring only one of each name is added.
-Refactor some palette path searching code.
-Make ReadFile() throw and catch an exception if the file operation fails.
-A little extra safety in foci and foci3D with a call to Zeps().
-Cast to (real_t) in the OpenCL string for the w variation, which was having trouble compiling on Mac.
-Fixing missing comma between paths in InitPaletteList().
-Move Xml and PaletteList classes into cpp to shorten build times when working on them.
-Remove default param values for IterOpenCLKernelCreator<T>::SharedDataIndexDefines in cpp file.
-Change more NULL to nullptr.
--User changes
-Add many tooltips to help clarify functionality.
-Select multiple flames in library for del/move. Still only one allowed to be set as the current.
-Show checkbox for current flame. Remember this is not necessarily what's selected.
-User can now drag a square to select xforms, which keeps in sync with checkboxes.
-Remove --nframes from command line. Replace with new params: --loopframes, --interpframes, --interploops.
-Add two new options to EmberGenome: --cwloops --cwinterploops to specify whether rotation should go clockwise instead of the default counter clockwise.
-Add these to Fractorium as checkboxes.
-Apply All now also works for toggling animate flag on xforms.
-Options dialog now allows user to set whether double click toggles spinners, or right click does.
--Bug fixes
-Selecting final and non-final xforms, and then dragging the non-final did not drag the final with it.
-Selecting all xforms when a final was present, then deleting crashed the program.
-Remove support for ppm files in the command line programs, it's an outdated format.
-Switching between SP and DP kept reapplying the palette adjustments.
--Code changes
-Move build system to Visual Studio 2015 and Qt 5.6.
-SSE used during addition of points to the histogram.
-Remove last remnants of old flam3 C code and replace with C++.
-Remove unused code involving tbb::task_group.
-Make settings object a global shared_ptr singleton, so it doesn't have to be passed around.
-Always force times of each flame to increase from zero when saving a file.
-Remove check for times when doing a sequence in EmberGenome because the original times are never used there.
--Bug fixes
-Multi-GPU synchronization was not actually thread safe and was likely doing less iters than requested. It is now properly synchronized.
--Code changes
-Optimize Interpolater by making it a non-static class by adding some members used for caching values during interpolation.
-Cache values in SheepTools as well, which was already a non-static class.
-General cleanup.
--Bug fixes:
-Fix crash when using smooth interpolation in EmberGenome.
-Print error and exit EmberGenome when sequencing if times are not
sorted.
--Code changes:
-Another attempt at Singleton. This reverts the design to what it was
before with a fix to the code that was causing it not to behave like a
singleton should.
-Edits will not save back to the file in memory on render completion when preview renderer is running.
--Bug fixes
-dc_perlin was crashing on Nvidia when using SP.
-Duplicate images were randomly getting added to the file in memory.
-Crash when opening an Xml with less than 2 flames in it.
--Code changes
-Use raw array of floats in OpenCL for perlin noise, rather than float3/double3.
-Add some default cases to dc_perlin.
-Redo singleton pattern yet again. Deriving from a templated Singleton<T> class was creating a separate instance per module. Now only one instance of each type will ever be created and it will be wrapped in a shared_ptr which guarantees its deletion as main() exits.
-Remove the option --intpalette to format the palette in the xml as ints. If they are not hex formatted, then they should always be float. This option was pointless.
-Cleanup some options text for the command line programs.
-Allow for dragging around flames in the library tab. This is useful for setting up the order of an animation.
-Make the opening of large files in Fractorium much more efficient when not-appending.
-Make the opening of large files in all EmberRender and EmberAnimate more efficient.
-Better error reporting when opening files.
--Bug fixes
-Get rid of leftover artifacts that would appear on preview thumbnails when either switching SP/DP or re-rendering previews.
-Filename extension was not being appended on Linux when saving as Xml, thus making it impossible to drag that file back in becase drop is filtered on extension.
--Code changes
-Move GCC compiler spec to C++14. Building with 5.3 now on linux.
-Use inline member data initializers.
-Make a #define for static for use in Utils.h to make things a little cleaner.
-Make various functions able to take arbitrary collections as their parameters rather than just vectors.
-Make library collection a list rather than vector. This alleviates the need to re-sync pointers whenever the collection changes.
-Subclass QTreeWidget for the library tree. Two new files added for this.
-Remove all usage of #ifdef ROW_ONLY_DE in DEOpenCLKernelCreator, it was never used.
-Add move constructor and assignment operator to EmberFile.
-Add the ability to use a pointer to outside memory in the renderer for the vector of Ember<T>.
-Make a lot more functions const where they should be.
-Better handling of crossed min/max DE filter values on the GUI.
-Changes to spatial and density filter values will no longer restart the entire render.
-Support reading cam_zoom from xml as zoom since JWildfire uses cam_zoom.
-Change drag n drop behavior: the default is now to append, hold Ctrl to overwrite.
-Set max value of zoom to 25 because it will crash with values around 28 or 29 due to numeric overflow when scaling quality.
-Update links in About Dialog.
-Rename some controls in Options Dialog.
-Move the color curves control to the Palette tab.
--Bug fixes
-Remove extra space in info tree text when dealing with a linked xform.
-Update summary xform name field whenever xform name changes.
-Get rid of selection border on summary tab xform tree cells.
-Only add variations from Xml that have a non-zero weight. There seemed to be spurious flattens coming from Apo with a weight of 0.
--Code changes
-Gutters are now a fixed size of 8 * supersample.
-Use stl data() member to get pointer to first element instead of &vec[0].
-Eliminate extra calls in renderer to ComputeBounds(), CreateSpatialFilter() and CreateTemporalFilter() to only be done at the start of a render.
-Another attempt at vectorizing LogScaleDensityFilter(). Vectorizes, but not sure if it helps.
-Some other loop optimizations in Renderer.
-No longer check temporal samples in response to some control changes, they are always 1 in the interactive renderer.
-Remove some warnings about interpolation type on first and last flames.
--Code changes
-Make DE block size always be 16x16, this should help stability on some Nvidia cards. No changes for AMD cards since they were that size already.
-Since the block size is now so small, do not reduce it further when supersampling.
-Clean up some variable names and documentation around OpenCL DE to be more clear.
-Really fix locking of affine scale.
--Code changes
-Remove dependency projects from the solution. Move to a project design where they are built once via command line and stored in a /Deps folder.
--Because of this, libpng is built as a static lib instead of a dll because that's what its command line makefile supports.
--Remove libpng16.dll from Wix installer.
-Remove all configs except for debug and release.
-Remove all platforms except for x64.
-Add #define __TBB_NO_IMPLICIT_LINKAGE 1 to prevent tbb from locking for tbb_debug.lib by default on debug builds.
-Put Ember.rc in a filter folder in the project.
-Place pragma warning disable statements in PCH files rather than in projects. This makes it easier when using Qt Creator.
-Move all resource files to the MSVC folder.
-Set all targets in QtCreator project to their lowercase names to be more *nix friendly. Set -l link statements to use these new lowercase names for ember and embercl.
-Rework projects to favor shadow builds.
-Remove the symlinks.sh file and all references to it. It was never needed. Instead, just specify multiple include and link paths in the .pro files.
-Change WIN32 to _WIN32.
-Fix a few code warnings.
-Fix crash when using Lanczos2 filter with color curves due to negative numbers. Fix by passing abs() of first argument to pow() in Renderer::GammaCorrection().
-Fix crash in hexes with SP. Rounding error caused out of bounds index.
-Add variations changes to the list of functionality that can be applied to all xforms using the Select tab.
-Allow for graphical affine adjustments to apply to multiple selected xforms.
-Slight optimization of the pie variation.
-Undo state is only saved when the render completes and the mouse buttons are released. This helps avoid intermediate steps for quickly completing renders while dragging.
-Add some keyboard shortcuts for toolbar and menu items.
-Make info tab tree always expanded.
--Bug fixes
-Make precalcs for all hypertile variations safer by using Zeps() for denominators.
-Changing the current xform with more than one selected would set all xform's color index value that of the current one.
-Use hard found palette path information for randoms as well.
-OpenCL build and assignment errors for Z value in epispiral variation.
-Unitialized local variables in hexaplay3D, crob, pRose3D.
--Code changes
-Change static member variables from m_ to s_.
-Get rid of excessive endl and replace with "\n".
-Remove old IMAGEGL2D define from before Nvidia supported OpenCL 1.2.
-Remove old CriticalSection code and use std::recursive_mutex.
-Make Affine2D Rotate() and RotateTrans() take radians instead of angles.
-More C++11 work.
-General cleanup.
-Allow locking of the scale at which affine circles are displayed.
-Allow user to toggle whether xform will be animated when generating sequences. Also show the animate value when loading.
--Code changes
-More conversion to C++11 style code.
-Add another value to the eXformUpdate enum called UPDATE_CURRENT_AND_SELECTED in anticipation of future work.
-Remove some old #defines.
-Allow for pausing the renderer in the main window. This makes is more efficient when entering many parameters, such as when following a tutorial.
-Add support for new variations: erf, gamma, jac_cn, jac_dn, jac_sn, logDB, pressure_wave, pRose3D, splits3D, w, waves2b, x, xerf, y, z.
-Inform user of the start and stop of file parsing in EmberAnimate because the files could potentially be very large.
-Move the follwing fields to a new table called Animation: Interpolation, Affine Interpolation, Temporal Samples, Temporal Filter Width, Temporal Filter Type.
-These currently have no effect on the interactive renderer and instead are used when running flames through EmberGenome to generate sequences, and then animating them in Fractorium or EmberAnimate.
-Add new parameter overrides for EmberRender and EmberAnimate which directly assign values to all flames being rendered, rather than scale:
--quality
--demin
--demax
--Bug fixes
-Left pad instead of right pad names of sequence outputs from EmberGenome.
-Unique file naming was broken for files which already had an underscore in them.
-Properly report that png is the default format of EmberRender and EmberAnimate output instead of erroneously claiming it was jpg.
-Make command line programs search these folders in this order for the palette file:
./
~/.fractorium
~/.config/fractorium
/usr/share/fractorium
/usr/local/share/fractorium
-Fix possible bad values in hexes.
-Better assignment of Z variables.
-Fix boarders due to use of poorly implemented rint() function from flam3. Use std::rint() now.
-wedge_sph was completely wrong due to having accidentally swapped the mapping of two parameters.
-Make juliascope juliascope_power parameter be of type REAL_NONZERO since it's used as a denominator.
-Make Z assignment compatible with the originals in:
-arch, bcircle, bCollide, bent, bent2, bisplit, blob, blur_linear, blur_square, bMod, boarders, boarders2, bSwirl, bTransform, butterfly, cardioid, cell, circleblur, circlize, circlize2, circus, collideoscope, cos, cosine, cosh, coth, cpow, cpow2, crescents, cropn, csc, csch, curl, curve, dc_gridout, deltaa, diamond, disc2, eclipse, eCollide, edisc, eJulia, elliptic, eMod, eMotion, ennepers, epispiral, ePush, eRotate, eScale, eSwirl, ex, exp, expo, exponential, fan, fdisc, fibonacci, fibonacci2, fisheye, flipcircle, flipy, flower, flux, funnel, glynnia, GlynnSim1, GlynnSim2, GlynnSim3, gridout, handkerchief, heart, hole, idisc, julia, julian2, juliaNab, kaleidoscope, lazyTravis, Lissajous, mask, MobiusN, mobius_strip, modulus, murl, murl2, npolar, ortho, oscilloscope, parabola, perspective, petal, phoenix_julia, pie (was also inconsistent between cpu and gpu), poincare, popcorn, popcorn2, power, pow_block, rational3, rays, rblur, rings, rippled, roundspher, sec, secant2, sigmoid, sin, sineblur, sinh, sinusgrid, sphericaln, spiralwing, spirograph, split, squarize, squirrel, squish, sschecks, starblur, stripes, stwin, super_shape, tan, tancos, tangent, tanh, TwinTrian, twoface, unpolar, waves, wavesn, wedge_julia, whorl, xheart, zblur, zscale.
--Code changes
-Generalize Variation::PrecalcHelper() and rename to PrePostPrecalcHelper().
--Do the same for the OpenCL version and rename it PrePostPrecalcOpenCLString().
-Rename Variation::m_AssignType to m_PrePostAssignType since it's only relevant to pre/post variations.
-Add post_smartcrop.
--Bug fixes
-Fix bug in crackle.
-Wrong point assignment in hexaplay3D, hexnix3D.
-Improper Z assignment in rblur.
-Fix inconsistency with original in circlecrop.
-Put EMBER_ROOT bakc to ./../../../ in default.pri. This is TBD.
--Code changes
-Convert all enums to class enum to be consistent with C++11 style.
-Convert some if/else statements in filter classes to case statements.
-Add overloaded stream operators to print various enums.
-Optimize crob, nBlur.
-Fix weird assignment statement in falloff3.
-Cleanup in VarFuncs::SimplexNoise3D().
-Replace fabs() with std::abs().
-General cleanup.
-Convert all enums to class enum to be consistent with C++11 style.
-Convert some if/else statements in filter classes to case statements.
-Add overloaded stream operators to print various enums.
-Convert all enums to class enum to be consistent with C++11 style.
-Convert some if/else statements in filter classes to case statements.
-Add overloaded stream operators to print various enums.