-Allow the user to resume a finished render in the final render dialog with a higher quality. This only applies to rendering a single image with no strips.
-Make clear xaos apply to all when Apply All is checked.
-Fix some potential OpenCL compilation bugs on circlecrop, circlecrop2, oscilloscope2, Truchet_hex_crop.
-Prevent the minus key from changing the current xform when being pressed in a textbox.
--Code changes
-Cleanup some casting in depth_blur, depth_blur2.
-Fix xform selection logic to prevent selecting hidden pre and post xforms.
-Remove the "Current" visibility option for pre/post affines. Instead just have "Selected" and "All". If none are selected, show current.
-Fix xform selection logic to prevent selecting hidden pre and post xforms.
-Add hex_modulus.
--Bug fixes
-starblur was wrong.
--Code changes
-Optimize Truchet_hex_crop, Truchet_hex_fill.
-Cleanup Truchet_inv.
-Add new file Variations08.h, and move Gnarly and inkdrop there.
-Undo list length increased from 128 to 512.
--Code changes
-auguer doesn't need Zeps().
-Additional check on undo list length when adding in certain circumstances.
-Add gnarly variation.
--Bug fixes
-Fix reading of post variations in .chaos files.
-Make selection of points on color curves control apply only to the current selection as specified by the radio buttons below.
--Code changes
-Use std::complex<T> type in some variations' CPU code.
-Dragging library items to a new position was not properly resetting the current flame pointer, so subsequent edits would unintentionally overwrite different flames.
-Add new variations waves22, waves23, waves42, waves3 and waves4 from user tatasz.
-Add new stylesheet called lightdark.qss which gives a more modern look to the dark theme. Started by Michel Mastriani (triptychaos).
--Included in the qmake and Wix installers.
--Code changes
-Add a new C# project that attempts to convert Apophysis plugins to Fractorium style Variation classes. It's not entirely perfect, but gets most of the job done much more quickly than doing so manually.
-Remove unused OpenCL functions from variations: elliptic, poincare, mask, bMod, bSwirl, bTransform, bCollide, farblur, popcorn2_3D, falloff, falloff2, falloff3, crackle2, waves2b, hypercrop, depth_gaussian2, depth_sine, depth_sine2, dust, asteria, vibration, vibration2, arctanh, smartshape, squares, starblur2, Truchet,.
-Add code in EmberTester to automatically detect such unused functions.
-Clear all color curves when clicking Reset while holding down Ctrl.
-Interpolate color curves when generating a sequence.
--Bug fixes
-Undo a change made last year which gave the wrong color index for final xforms when generating a sequence.
--Code changes
-No longer assume palettes are 256 elements. Can now read longer palettes.
-Ensure OpenCL images always get written when created.
-Clear all color curves when clicking Reset while holding down Ctrl.
--Code changes
-No longer assume palettes are 256 elements. Can now read and write longer palettes.
-Ensure OpenCL images always get written when created.
-Show common folder locations such as documents, downloads, pictures in the sidebar in all file dialogs.
-Warning message about exceeding memory in final render dialog now suggests strips as the solution to the problem.
-Strips now has a tooltip explaining what it does.
-Allow more digits in the spinners on the color section the flame tab.
-Add manually adjustable size spinners in the final render dialog. Percentage scale and absolute size are fully synced.
-Default prefix in final render is now the filename when doing animations (coming from sequence section of the library tab).
-Changed the elliptic variation back to using a less precise version for float, and a more precise version for double. The last release had it always using double.
-New applied xaos table that shows a read-only view of actual weights by taking the base xform weights and multiplying them by the xaos values.
-New table in the xaos tab that gives a graphical representation of the probability that each xform is chosen, with and without xaos.
-Add button to transpose the xaos rows and columns.
-Add support for importing .chaos files from Chaotica.
--Pasting back to Chaotica will work for most, but not all, variations due to incompatible parameter names in some.
-Curves are now splines instead of Bezier. This adds compatibility with Chaotica, but breaks it for Apophysis. Xmls are still pastable, but the color curves will look different.
--The curve editor on the palette tab can now add points by clicking on the lines and remove points by clicking on the points themselves, just like Chaotica.
--Splines are saved in four new xml fields: overall_curve, red_curve, green_curve and blue_curve.
-Allow for specifying the percentage of a sub batch each thread should iterate through per kernel call when running with OpenCL. This gives a roughly 1% performance increase due to having to make less kernel calls while iterating.
--This field is present for interactive editing (where it's not very useful) and in the final render dialog.
--On the command line, this is specified as --sbpctth for EmberRender and EmberAnimate.
-Allow double clicking to toggle the supersample field in the flame tab between 1 and 2 for easily checking the effect of the field.
-When showing affine values as polar coordinates, show angles normalized to 360 to match Chaotica.
-Fuse Count spinner now toggles between 15 and 100 when double clicking for easily checking the effect of the field.
-Added field for limiting the range in the x and y direction that the initial points are chosen from.
-Added a field called K2 which is an alternative way to set brightness, ignored when zero.
--This has no effect for many variations, but hs a noticeable effect for some.
-Added new variations:
arcsech
arcsech2
arcsinh
arctanh
asteria
block
bwraps_rand
circlecrop2
coth_spiral
crackle2
depth_blur
depth_blur2
depth_gaussian
depth_gaussian2
depth_ngon
depth_ngon2
depth_sine
depth_sine2
dragonfire
dspherical
dust
excinis
exp2
flipx
flowerdb
foci_p
gaussian
glynnia2
glynnsim4
glynnsim5
henon
henon
hex_rand
hex_truchet
hypershift
lazyjess
lens
lozi
lozi
modulusx
modulusy
oscilloscope2
point_symmetry
pointsymmetry
projective
pulse
rotate
scry2
shift
smartshape
spher
squares
starblur2
swirl3
swirl3r
tanh_spiral
target0
target2
tile_hlp
truchet_glyph
truchet_inv
truchet_knot
unicorngaloshen
vibration
vibration2
--hex_truchet, hex_rand should always use double. They are extremely sensitive.
--Bug fixes:
-Bounds sign was flipped for x coordinate of world space when center was not zero.
-Right clicking and dragging spinner showed menu on mouse up, even if it was very far away.
-Text boxes for size in final render dialog were hard to type in. Same bug as xform weight used to be so fix the same way.
-Fix spelling to be plural in toggle color speed box.
-Stop using the blank user palette to generate flames. Either put colored palettes in it, or exclude it from randoms.
-Clicking the random palette button for a palette file with only one palette in it would freeze the program.
-Clicking none scale in final render did not re-render the preview.
-Use less precision on random xaos. No need for 12 decimal places.
-The term sub batch is overloaded in the options dialog. Change the naming and tooltip of those settings for cpu and opencl.
--Also made clear in the tooltip for the default opencl quality setting that the value is per device.
-The arrows spinner in palette editor appears like a read-only label. Made it look like a spinner.
-Fix border colors for various spin boxes and table headers in the style sheet. Requires reload.
-Fix a bug in the bwraps variation which would produce different results than Chaotica and Apophysis.
-Synth was allowed to be selected for random flame generation when using an Nvidia card but it shouldn't have been because Nvidia has a hard time compiling synth.
-A casting bug in the OpenCL kernels for log scaling and density filtering was preventing successful compilations on Intel iGPUs. Fixed even though we don't support anything other than AMD and Nvidia.
-Palette rotation (click and drag) position was not being reset when loading a new flame.
-When the xform circles were hidden, opening and closing the options dialog would improperly reshow them.
-Double click toggle was broken on integer spin boxes.
-Fixed tab order of some controls.
-Creating a palette from a jpg in the palette editor only produced a single color.
--Needed to package imageformats/qjpeg.dll with the Windows installer.
-The basic memory benchmark test flame was not really testing memory. Make it more spread out.
-Remove the temporal samples field from the flame tab, it was never used because it's only an animation parameter which is specified in the final render dialog or on the command line with EmberAnimate.
--Code changes:
-Add IsEmpty() to Palette to determine if a palette is all black.
-Attempt to avoid selecting a blank palette in PaletteList::GetRandomPalette().
-Add function ScanForChaosNodes() and some associated helper functions in XmlToEmber.
-Make variation param name correction be case insensitive in XmlToEmber.
-Report error when assigning a variation param value in XmlToEmber.
-Add SubBatchPercentPerThread() method to RendererCL.
-Override enterEvent() and leaveEvent() in DoubleSpinBox and SpinBox to prevent the context menu from showing up on right mouse up after already leaving the spinner.
-Filtering the mouse wheel event in TableWidget no longer appears to be needed. It was probably an old Qt bug that has been fixed.
-Gui/ember syncing code in the final render dialog needed to be reworked to accommodate absolute sizes.
--Bug fixes
-File saving was broken.
--Code changes
-File saving and opening dialogs were shared between a single object which was causing trouble. Make them all use their own objects.
-Disable Start button in final render dialog when Pause is clicked.
--Bug fixes
-Rapidly changing spinner values was causing the OpenCL renderer to report a failure, when it was really just aborting.
--Code changes
-Renderers never internally set abort to true due to a failure. Abort is only set to true by the calling code.
-Add a button to swap the pre and post affine values for all selected xforms.
--Bug fixes
-Remove the ability to change spinner values with +=-=, it was conflicting with other things and added no real value.
-All file dialog opening in Linux would freeze. No longer using native file dialogs, they are broken.
-Set default open path to the desktop if there is no settings file present, which will be the case on the first run.
-Amphibole_Supergroup.ugr palette had an invalid character in two of the palette names.
--Code changes
-Change some table header padding styles to work with new Qt. Qss reload is required.
-Ensure the open folder path setting always has a valid string in it before opening a folder.
-Add new palettes from user Rubydeva.
--Bug fixes
-Avoid an occasional divide by zero in the OpenCL renderer when using the interactive editor.
--Code changes
-Use exact comparisons in IsID() and IsZero() in Affine2D.
-When testing for bad point values while iterating, only test for NaN now.
-For rendering with OpenCL on the command line and in the final render dialog, use an optimized kernel that does a direct assignment for any affines which are ID.
-Further work on the About box.
--Change qss files to make the text box in the About box be the same color as the one in the style dialog, so the link text is easier to see.
--This requires reloading the qss file.
--Bug fixes
-Pre/post assign method was wrong for Sphereblur, Concentric, RandCubes and PixelFlow.
--Code changes
-Make Hypershift2 use MwcNextRange() instead of MwcNext() %.
-Add m_HasPre to Xform similar to m_HasPost, to skip application of the affine if it's the ID matrix (in this case just assign the input x and y points). This gives a 5% speedup.
-New look for the About dialog, it was growing too large before. More work to be done on it in a follow up commit.
--Bug fixes
-Fix build with new glm, no longer uses type_int.hpp.
-Add buttons to copy and paste affine transforms.
-Show xform names on the column headers of the xaos table.
-Add a color-coded third column to the variations tree which shows any properties of each variation which are non-standard.
-Draw a transparent circle over hovered xforms.
-Change how xforms respond to dragging. Rotate only is now the default, and scale will only happen with shift.
--Optionally do scale and rotate when holding shift, via a setting in the options dialog.
--Bug fixes
-Snapping when dragging was wrong sometimes.
-The program would very rarely crash on startup due to some values being in an uninitialized state.
--Code changes
-Change almost every variation to use fma() in OpenCL when doing computations of the form a * b + c. This provides a slight speedup, mostly in double precision mode.
-Also apply fma() to affine calcs.
-Cleanup of OpenGL affine drawing code.
-Separate the concept of hovering and selecting xforms.
-Attempt to preserve xaos when adding xforms. Note this is not an exact copy, but just a preservation of some values based on position.
-Add some acceleration to the changing of spinner values when dragging the right mouse button to adjust.
-Make the pivot be the center of the viewable area when doing drag/rotate/scale with the right mouse button.
--Clamp minimum scale to 10
--Draw a line from the mouse position to the pivot.
-Keep a cache of the last added final xform with each flame so that it can be quickly added, removed, then added back for testing its effect.
--This is not saved with the xml file and is solely for interactive editing.
--Bug fixes
-File filtering in open and save dialogs were broken.
-Right clicking on integer spin boxes was causing the context menu to pop up, when it should be supressed just like double spin boxes.
-Deleting xforms was still broken.
--Code changes
-Refactor the code for adding and pasting xforms into a single global static function called AddXformsWithXaos().
-Give tabs a height of 4px in the qss files. Looks a little large on 4k screens, but just right on HD screens which are much more common.
-Allow for styling of zero and non-zero variation tree nodes via qss.
-Allow for toggling whether to interpolate between colors in the palette editor, or to do hard cuts between colors.
-Allow for adjusting spinner values with the + = or up arrow keys to increase, and - _ or down arrow keys to decrease.
-Allow for responding to global presses of + = and - _ to cycle up or down to specify which xform is set as the current one.
-Allow for adding "layers" via xaos which will add a user-specified number of xforms, and set certain xaos values to 0 or 1.
-Add a new menu item under the Edit menu to copy the OpenCL iteration kernel source to the clipboard.
-Show text on the status bar which indicates that an OpenCL kernel compilation is taking place.
-Show xform name on xform combo box when expanded. Adjust size to fit all names.
-Draw post affine circles using dashed lines.
-Prevent QSS dialog from styling its editor, which makes it easier to see text when creating styles which have custom colors for text boxes.
--Bug fixes
-Fix up some table layouts which seemed to have regressed/decayed over time for reasons unknown.
-Using undo/redo would create a new flame in the library every time.
-Solo was not being preserved when using undo/redo.
--Code changes
-Make the solo flag be a part of the flame data now.
-Fix some tabification in the OpenCL code for EllipticVariation.
-Fix tabification in the varState code for OpenCL.
-Add an event called m_CompileBegun to RendererCL that is called right before an OpenCL compile is begun.
--This required making RendererCLBase not a pure virtual base class. Member functions just return defaults.
-Filter key presses on main window to only process the third one. This is due to Qt triggering three events for every key press.
-The palette preview table was installing an event filter for seemingly no reason. Remove it.
-Mark certain virtual functions as override in SpinBox and DoubleSpinBox.
-Double clicking on width or height spinner resizes both, but scales to the one double clicked.
--Bug fixes
-Show grid setting was not being preserved during program run, only on close.
-Zooming with the mouse wheel was broken for images whose size is greater than the screen area.
-No longer constrain pitch, yaw or depth spinners to -180 - 180.
--Bug fixes
-Properly set color index on padded xforms.
-Adding a padding final xform included a linear variation with a weight of zero to not appear empty. Made it have a weight of 1.
-Always write animate tag on final xform when saving to Xml.
-Motion was being applied to the wrong flame in SheepTools::Edge(), so apply it to the correct one.
-Prevent divide by zero when normalizing variation weights.
-Was accidentally adding the placeholder value of -9999 for motion_offset to varation weights and parameters when applying motion. Set to zero if no value present.
-Clamp flame rotation values to -180 - 180 when reading a flame from Xml.
-Events were not properly wired for user changes in the random rotations per blend controls in the sequencer.
-Fix major UI bugs with sequencer min/max random controls which made it nearly impossible to hand type values.
-Values from rotations per blend and rotations per blend max were not being saved to file between program runs.
-Checking animate for an xform was not applied to all flames even if Apply All was checked.
-Changing interpolation type, temporal filter width, temporal type, and affine interpolation type were not actually saving to the flame when changed.
-Grid on the main window was not being drawn at the right scale initially due to some OpenGL initialization occurring in the wrong order.
-Severe bugs in sequence generation code:
--Improperly detected padding xforms.
--When looking for specific variations during xform aligning, only presence was detected, when it should have been presence plus a weight greater than zero.
--When adding specific variations during xform aligning, must first remove any variations of that type.
--Two variables were unsigned when they should have been signed. This prevented large blocks of code from ever executing.
--When interpolating affines, an EPS that was too small was used, causing affine values to interpolate incorrectly. Instead use 1e-10 to ensure results equal to flam3.
--Code changes
-Modify FractoriumEmberController::UpdateXform() to pass the selected xform index as well as the absolute index to func().
-Add two new variations, hyperbolic and hypershift2.
-Allow for animating final xforms.
-More detailed diagnostics when any action in the OpenCL renderer fails.
-Allow for creating an OpenCL renderer which does not share a texture with the main window, and instead manually copies its final output image from GPU to CPU then back to GPU.
--Bug fixes
-Text was not properly being copied out of the Info | Bounds text box.
--Code changes
-Remove Renderer::AccumulatorToFinalImage(v4F* pixels, size_t finalOffset), it's no longer needed or makes sense.
-Controllers no longer keep track of shared status, it's kept inside the renderers.
-Make getter functions in FractoriumOptionsDialog be public.
-Allow for pausing and resuming of final renders.
--Code changes
-Only instantiate float version of Palette and PaletteList, no need for double since it's never used.
-Allow for FinalRenderDialog to be queried on whether it's currently rendering.
-Convert OpenGL drawing code to use GLSL. Leave #define in until testing on multiple platforms is done.
-Always use double precision extension defines in OpenCL programs, even if DP is not selected. This is because elliptic now always uses DP.
-Allow 7 decimal places in variations spinners.
-Try to prevent infinite loop that sometimes happens when drawing grid. Unsure if this actually works since it's very hard to reproduce.
-Update /debian/changelog to use a newer version of ubuntu named artful. Users will need to add that PPA to get it via apt.
-Update copyright year to 2018.
-Allow group dragging and floating of dock widgets.
--Note this has a bug where if tabls are grouped while floating, the tab position is placed on the bottom. It restores to the top when dropping on a dock location. I've filed a bug at qt.io
-Make some tables auto size to their contents because some text appeared obscured on Linux.
-The size of the xforms and palette tabs were preventing the main window from being resized to a small size on lower resolution monitors when docked. So rework scroll areas, minimum sizes and layouts to allow for a smaller main window.
-Support 4k monitors, and in general, properly scale any monitor that is not HD.
-Allow for a spatial filter of radius zero, which means do not use a spatial filter.
-Add new variations: concentric, cpow3, helicoid, helix, rand_cubes, sphereblur.
-Use a new method for computing elliptic which is more precise. Developed by Discord user Claude.
-Remove the 8 variation per xform limitation on the GPU.
-Allow for loading the last flame file on startup, rather than randoms.
-Use two different default quality values in the interactive renderer, one each for CPU and GPU.
-Creating linked xforms was using non-standard behavior. Make it match Apo and also support creating multiple linked xforms at once.
--Bug fixes
-No variations in an xform used to have the same behavior as a single linear variation with weight 1. While sensible, this breaks backward compatibility. No variations now sets the output point to zeroes.
-Prevent crashing the program when adjusting a value on the main window while a final render is in progress.
-The xaos table was inverted.
--Code changes
-Convert projects to Visual Studio 2017.
-Change bad vals from +- 1e10 to +-1e20.
-Reintroduce the symmetry tag in xforms for legacy support in programs that do not use color_speed.
-Compiler will not let us use default values in templated member functions anymore.
--Bug fixes
-Strips renders crashed.
-Better handling of large memory allocations by forcing a free of previous allocations.
-Final render dialog did not properly save last used extension setting.
-Density filtering progress bar in final render dialog did not update if only log scaling was being used.
--Disallow the use of synth when randomly generating xforms if the user has an Nvidia device present on their system.
Code changes:
--Use some CPU defines in CL code.
--Change curves color scaling buffer to be 2^16 per channel instead of 2^17 which was probably overkill.
--Code in RendererClDevice::Init() to detect Nvidia was wrong even thought it technically worked.
--Add support for Exr files which use 32-bit floats for each RGBA channel. Seems to come out too washed out.
--Allow for clearing an individual color curve.
--Allow for saving multiple image types in EmberRender and EmberAnimate. All writes are threaded.
--Remove --bpc command line argument. Add format png16 as a replacement.
--Remove --enable_jpg_comments and --enable_png_comments command line arguments, and replace them with --enable_comments which applies to jpg, png and exr.
--Add menu items to variations and affine spinners which allow for easy entry of specific numeric values like pi.
--Make final render dialog be wider rather than so tall.
Bug fixes:
--Fix some OpenCL compile errors on Mac.
--Remove ability to save bitmap files on all platforms but Windows.
Code changes:
--New dependency on OpenEXR.
--Allow Curves class to interact with objects of a different template type.
--Make m_Curves member of Ember always use float as template type.
--Set the length of the curves array to always be 2^17 which should offer enough precision with new 32-bit float pixel types.
--Set pixel types to always be 32-bit float. This results in a major reduction of code in the final accumulation part of Renderer.h/cpp.
--Remove corresponding code from RendererCL and FinalAccumOpenCLKernelCreator.
--Remove Transparency, NumChannels and BytesPerPixel setters from Renderer.h/cpp.
--Add new global functions to format final image buffers and place all alpha calculation and scaling code in them.
--Blending is no longer needed in OpenGLWidget because of the new pixel type.
--Make new class, AffineDoubleSpinBox.
--Attempt to make file save dialog code work the same on all OSes.
--Remove some unused functions.
--User changes
-dark.qss is now per-OS.
-Properly set/reload palette when coming from the palette editor. The latter must be done if they've modified the current palette even if they've clicked cancel.
--Bug fixes
-Make the following variations safer by using Zeps(): conic, bipolar, edisc, whorl, tan, csc, cot, tanh, sech, csch, coth, auger, bwraps, hypertile3d, hypertile3d1, ortho, poincare, rational3, barycentroid, sschecks, cscq, cschq, scry_3D, splitbrdr, hexcrop, nblur, crob.
-Fix bug enabling/disabling overwrite button in palette editor.
-Small optimization for gdoffs, use precalcAtanYX.
-Properly propagate z through circlesplit, cylinder2 and tile_log variations.
-Some values in truchet_fill could've been NaN.
--Code changes
-Make most installation files read only.
-Qualify many calls with std:: to ensure they're not colliding with glm::
-Use auto in more places.
--Bug fixes
-Fix crash when opening palette editor with a flame whose palette specifies no originating file.
--Code changes
-Revert font changes, only use qss for these now.
--User changes
-Make all fonts be MS Shell Dlg 2. This will require reloading dark.qss if users are already using it.
-Limit size of the left side of the palette editor.
-Disable create from image buttons in the palette editor when working on a fixed palette.
--Bug fixes
-The following variations were wrong: coshq, cothq.
-During iteration, the color index could become nan if all xform color speeds were negative. This could lead to bad results on the GPU. Fix to check for nan. Minimal speed difference.
--Code changes
-Make the following variations safer by using Zeps(): sinq, sinhq, secq, sechq, tanq, tanhq, cosq, coshq, cotq, cothq, cscq, cschq, estiq.
-Always pass -cl-no-signed-zeros -cl-denorms-are-zero to kernel compiles for both single and double.
-Flush all denormals to zero for all executable programs. This will likely lead to a speedup for badly behaving programs.
--User changes
-Add support for adjusting xform color indices in the palette editor. Fixed palettes can now be displayed there, but they will have no color arrows as they are not editable.
-Add support for independent dimension scaling in the EmberRender and EmberAnimate programs to bring them in line with the final render dialog Fractorium.
--Bug fixes
-File paths with a space in them did not work in the command line programs.
-Any Xml file in the search paths would erroneously be treated as a palette file.
--Code changes
-Change some for loops to while loops when iterating through xforms.
-Allow FractoriumEmberController<T>::UpdateXform() to be able to apply the action to an xform at a specific index.
-Remove old code blocks build files that were never used.
-Make GetPath() return empty string if no path is present in the passed in file path.
-GetTotalXform() was always counting the final xform, even if it was unused.
--Bug fixes
-Fractorium would occasionally freeze after dismissing the final render dialog because some values were not properly re-initialized.
--Code changes
-Remove VS 2013 build files.
-Qualify sqrt with std:: in ColorTriangle.cpp
-Bump to version 1.0.0.3
-Remove all code for opacity adjustment, it's no longer needed.
-Small optimization on accumulating to the histogram on the CPU.
-Double clicking min/max DE filter spinners would not trigger a render reset if the other was non-zero. The fix has the downside of triggering a change event when scrolling even if the value is already capped. This is an acceptable tradeoff.
-Xaos has been wrong this entire time on the GPU because it was not selecting from the unweighted distributions on the very first iteration when fusing.
-Query matrices when drawing affines even if they are set not to be drawn because the values are used elsewhere.
-No longer need to move library items on a delayed timer when dragging and dropping.
-Fix strange spurious crash in library tab when switching between SP and DP.
-Compensate for severe Qt bug where dragging and dropping disjoint items in the Library tree would resort the dropped items in special situations.
-Move Info.plist to Data folder.
-Ensure RTTI is included in build.
-Add darker versions of .png icons.
-Add a palette editor.
-Add support for reading .ugr/.gradient/.gradients palette files.
-Allow toggling on spinners whose minimum value is not zero.
-Allow toggling display of image, affines and grid.
-Add new variations: cylinder2, circlesplit, tile_log, truchet_fill, waves2_radial.
--Bug fixes
-cpow2 was wrong.
-Palettes with rapid changes in color would produce slightly different outputs from Apo/Chaotica. This was due to a long standing bug from flam3.
-Use exec() on Apple and show() on all other OSes for dialog boxes.
-Trying to render a sequence with no frames would crash.
-Selecting multiple xforms and rotating them would produce the wrong rotation.
-Better handling when parsing flames using different encoding, such as unicode and UTF-8.
-Switching between SP/DP didn't reselect the selected flame in the Library tab.
--Code changes
-Make all types concerning palettes be floats, including PaletteTableWidgetItem.
-PaletteTableWidgetItem is no longer templated because all palettes are float.
-Include the source colors for user created gradients.
-Change parallel_for() calls to work with very old versions of TBB which are lingering on some systems.
-Split conditional out of accumulation loop on the CPU for better performance.
-Vectorize summing when doing density filter for better performance.
-Make all usage of palettes be of type float, double is pointless.
-Allow palettes to reside in multiple folders, while ensuring only one of each name is added.
-Refactor some palette path searching code.
-Make ReadFile() throw and catch an exception if the file operation fails.
-A little extra safety in foci and foci3D with a call to Zeps().
-Cast to (real_t) in the OpenCL string for the w variation, which was having trouble compiling on Mac.
-Fixing missing comma between paths in InitPaletteList().
-Move Xml and PaletteList classes into cpp to shorten build times when working on them.
-Remove default param values for IterOpenCLKernelCreator<T>::SharedDataIndexDefines in cpp file.
-Change more NULL to nullptr.
--User changes
-Add many tooltips to help clarify functionality.
-Select multiple flames in library for del/move. Still only one allowed to be set as the current.
-Show checkbox for current flame. Remember this is not necessarily what's selected.
-User can now drag a square to select xforms, which keeps in sync with checkboxes.
-Remove --nframes from command line. Replace with new params: --loopframes, --interpframes, --interploops.
-Add two new options to EmberGenome: --cwloops --cwinterploops to specify whether rotation should go clockwise instead of the default counter clockwise.
-Add these to Fractorium as checkboxes.
-Apply All now also works for toggling animate flag on xforms.
-Options dialog now allows user to set whether double click toggles spinners, or right click does.
--Bug fixes
-Selecting final and non-final xforms, and then dragging the non-final did not drag the final with it.
-Selecting all xforms when a final was present, then deleting crashed the program.
-Remove support for ppm files in the command line programs, it's an outdated format.
-Switching between SP and DP kept reapplying the palette adjustments.
--Code changes
-Move build system to Visual Studio 2015 and Qt 5.6.
-SSE used during addition of points to the histogram.
-Remove last remnants of old flam3 C code and replace with C++.
-Remove unused code involving tbb::task_group.
-Make settings object a global shared_ptr singleton, so it doesn't have to be passed around.
-Make stagger a double instead of a bool.
-Save stagger values to settings.
-Random stagger was being set in the wrong place.
-Save rotation values as double rather than int.
-Add animation sequence creation to Fractorium.
-Add two new options to EmberGenome which are used when generating an animation sequence.:
--startcount: Add this number to the filename of each flame.
--padding: Override the automatically calculated amount of padding zeroes added to each filename.
--Bug fixes
-Prevent filenames in command line programs from using scientific notation when rendering a large number of frames.
-Fix tab orders to match newer GUI items which were overlooked in previous releases.
-Re-render previews if transparency value in the options dialog was changed. Re-rendering was previously only done if early clip or y axis up was changed.
-Use transparency when rendering thumbnail previews.
--Code changes
-Wrap EmberCommon.h in a namespace called EmberCommon.
-Move FormatName() from EmberGenome to EmberCommon.h/cpp
-Add a prefix parameter to EmberFile::DefaultFilename() to allow for creating a default filename for sequences.
-When showing the final render dialog, allow specifying where it came from: the toolbar or the render sequence button.
-Refactor all preview rendering code out into its own class hierarchy with overrides for the main window and the final render dialog.
-Remove all preview render cancelling functions, they are now built into the new class hierarchy and a new render will not start until the previous one is stopped.
-Add two new function ConstrainLow() and ConstrainHigh() which wrap constraining two min/max spinboxes to each others' values.
-Add a bool to FractoriumEmberControllerBase::CopyEmberFile() to specify whether to copy the main file or the sequence file. This is somewhat of a hack and was done in a rush.
-Add a bool to FractoriumEmberControllerBase::SetEmberFile() to specify whether to move the file rather than copy. This is used in FinalRenderEmberController and improves efficiency.
-Add wrapper functions for variations filter dialog settings.
-Add a new option --statevars to EmberGenome to list the variations which change state.
-Allow for filtering in the Variations Dialog based on the same types listed in the EmberGenome options.
--Code changes
-More correctly populate VariationList::m_ParametricVariations and VariationList::m_NonParametricVariations to account for variations which have params only used for precalc.
-Consolidate some of the code in VariationList which searches by name.
-Add new options to EmberGenome to better help assess which variations have certain characteristics. The options are:
--sumvars: Display the names of all regular variations which have the default behavior of summing their outputs and exit.
--assignvars: Display the names of all regular variations which have the non-standard behavior of assigning their outputs and exit.
--ppsumvars: Display the names of all pre/post variations which have the non-standard behavior of summing their outputs and exit.
--ppassignvars: Display the names of all pre/post variations which have the default behavior of assigning their outputs and exit.
--dcvars: Display the names of all variations which use direct coloring and exit.
--parvars: Display the names of all variations which have parameters and exit.
--nonparvars: Display the names of all variations which do not have parameters (weight only) and exit.
--Code changes
-Make VariationList vectors have const elements since no callers should ever change them.
-Add new function to VariationList to retrieve a const ref to the parametric variations.
-Move some search functions out of EmberTester and into EmberCommon.h.
-General code cleanup.
-Remove --time option for EmberAnimate, it was redundant with --frame.
-Make --enable_jpg_comments and --enable_png_comments just be bools that when present mean true, rather than having to specify =true.
-Add a new argument --ts for EmberAnimate to allow the user to specify the temporal samples value to use for the entire animation. Useful for testing.
--Bug fixes
-Properly seed rands in EmberAnimate when specifying --isaac_seed and using more than one device with --opencl.
--Code changes
--Small cleanup to flatten/unflatten all code.
--Make EmberOptionEntry<T>::operator() return a const reference instead of a copy.
-Highlight power is now on by default.
-Allow for adjustments on the Flame tab to apply to all open flames in the file.
-Add two new buttons to the color tab to randomize and toggle the xform color indices.
-Remove the --strip option from EmberGenome. It was useless and was likely just a carry over from flam3 during its early debugging stages when testing strips.
-Make randoms in EmberGenome have default dimensions of 1920 x 1080.
-Prevent --inter and --rotate in EmberGenome from rotating backward before the first flame since it doesn't really make sense.
-Ensure every loaded flame has at least one xform in it.
-Change dark.qss to hide dotted selection outline around checkboxes. Users must reload it to take effect.
--Bug fixes
-The saving of last.flame during editing was appending the file when it should have been replacing.
-It was impossible for EmberGenome to create a random flame. It can now be done by specifying no arguments: EmberGenome.exe
-Crossing in EmberGenome was not logging the performed actions to the edit Xml tag.
-Apply sub batch size and fuse count to template files used on the command line.
-Use new default filter types with template files.
--Code changes
-Use cerr in SheepTools instead of cout.
-Set m_SubBatchSize and m_FuseCount to default values in Ember::Clear().
-Clean up some command line options text formatting.
-Always force times of each flame to increase from zero when saving a file.
-Remove check for times when doing a sequence in EmberGenome because the original times are never used there.
--Bug fixes
-Multi-GPU synchronization was not actually thread safe and was likely doing less iters than requested. It is now properly synchronized.
--Code changes
-Optimize Interpolater by making it a non-static class by adding some members used for caching values during interpolation.
-Cache values in SheepTools as well, which was already a non-static class.
-General cleanup.
--Bug fixes:
-Fix crash when using smooth interpolation in EmberGenome.
-Print error and exit EmberGenome when sequencing if times are not
sorted.
--Code changes:
-Another attempt at Singleton. This reverts the design to what it was
before with a fix to the code that was causing it not to behave like a
singleton should.
-Edits will not save back to the file in memory on render completion when preview renderer is running.
--Bug fixes
-dc_perlin was crashing on Nvidia when using SP.
-Duplicate images were randomly getting added to the file in memory.
-Crash when opening an Xml with less than 2 flames in it.
--Code changes
-Use raw array of floats in OpenCL for perlin noise, rather than float3/double3.
-Add some default cases to dc_perlin.
-Redo singleton pattern yet again. Deriving from a templated Singleton<T> class was creating a separate instance per module. Now only one instance of each type will ever be created and it will be wrapped in a shared_ptr which guarantees its deletion as main() exits.
-The concept of "saving back to file in memory" has been removed. The current ember is saved back to memory whenever the render completes and the thumbnail will be updated each time.
-Command line programs now default to using double precision.
-The --bits argument has been removed and replaced with --sp to specify single precision. If omitted, DP is used.
-Remove the --seed option, it was never used.
-Remove the --sub_batch_size option, it has been part of the Xml for a long time.
-Remove --hex_palette argument for EmberRender, it only makes sense in EmberAnimate and EmberGenome.
-Set enable_jpg_comments and enable_png_comments to false by default. It was a very bad idea to have them be true because it reveals the flame parameters used to render the image which many artists guard closely.
--Bug fixes
-Continuous update was broken.
-Undo list was broken with new Library tab design.
-Force repaint on xform checkbox change to ensure circles are immediately drawn around selected xforms.
--Code changes
-Remove save to back to file in memory icon, document-hf-insert.png.
-Remove the option --intpalette to format the palette in the xml as ints. If they are not hex formatted, then they should always be float. This option was pointless.
-Cleanup some options text for the command line programs.
-Allow for dragging around flames in the library tab. This is useful for setting up the order of an animation.
-Make the opening of large files in Fractorium much more efficient when not-appending.
-Make the opening of large files in all EmberRender and EmberAnimate more efficient.
-Better error reporting when opening files.
--Bug fixes
-Get rid of leftover artifacts that would appear on preview thumbnails when either switching SP/DP or re-rendering previews.
-Filename extension was not being appended on Linux when saving as Xml, thus making it impossible to drag that file back in becase drop is filtered on extension.
--Code changes
-Move GCC compiler spec to C++14. Building with 5.3 now on linux.
-Use inline member data initializers.
-Make a #define for static for use in Utils.h to make things a little cleaner.
-Make various functions able to take arbitrary collections as their parameters rather than just vectors.
-Make library collection a list rather than vector. This alleviates the need to re-sync pointers whenever the collection changes.
-Subclass QTreeWidget for the library tree. Two new files added for this.
-Remove all usage of #ifdef ROW_ONLY_DE in DEOpenCLKernelCreator, it was never used.
-Add move constructor and assignment operator to EmberFile.
-Add the ability to use a pointer to outside memory in the renderer for the vector of Ember<T>.
-Make a lot more functions const where they should be.
-Better handling of crossed min/max DE filter values on the GUI.
-Changes to spatial and density filter values will no longer restart the entire render.
-Support reading cam_zoom from xml as zoom since JWildfire uses cam_zoom.
-Change drag n drop behavior: the default is now to append, hold Ctrl to overwrite.
-Set max value of zoom to 25 because it will crash with values around 28 or 29 due to numeric overflow when scaling quality.
-Update links in About Dialog.
-Rename some controls in Options Dialog.
-Move the color curves control to the Palette tab.
--Bug fixes
-Remove extra space in info tree text when dealing with a linked xform.
-Update summary xform name field whenever xform name changes.
-Get rid of selection border on summary tab xform tree cells.
-Only add variations from Xml that have a non-zero weight. There seemed to be spurious flattens coming from Apo with a weight of 0.
--Code changes
-Gutters are now a fixed size of 8 * supersample.
-Use stl data() member to get pointer to first element instead of &vec[0].
-Eliminate extra calls in renderer to ComputeBounds(), CreateSpatialFilter() and CreateTemporalFilter() to only be done at the start of a render.
-Another attempt at vectorizing LogScaleDensityFilter(). Vectorizes, but not sure if it helps.
-Some other loop optimizations in Renderer.
-No longer check temporal samples in response to some control changes, they are always 1 in the interactive renderer.
-Make the default interpolation type be smooth.
-Correctly label interpolation types in the combo in the animation table on the Flame tab.
--Set the default combo index to be smooth.
-Attempt to prevent crash when selecting OpenCL in the final render dialog when unsupported hardware is present.
--This works by selecting the last known good device in the main window.
-Make usage of VarFuncs more consistent by moving some global functions there.
-Make CircleTrans1 a little safer by calling Zeps() on m_Sc during precalc.
-Begin prepping for 0.9.9.5 release.
-Really fix locking of affine scale.
--Code changes
-Remove dependency projects from the solution. Move to a project design where they are built once via command line and stored in a /Deps folder.
--Because of this, libpng is built as a static lib instead of a dll because that's what its command line makefile supports.
--Remove libpng16.dll from Wix installer.
-Remove all configs except for debug and release.
-Remove all platforms except for x64.
-Add #define __TBB_NO_IMPLICIT_LINKAGE 1 to prevent tbb from locking for tbb_debug.lib by default on debug builds.
-Put Ember.rc in a filter folder in the project.
-Place pragma warning disable statements in PCH files rather than in projects. This makes it easier when using Qt Creator.
-Move all resource files to the MSVC folder.
-Set all targets in QtCreator project to their lowercase names to be more *nix friendly. Set -l link statements to use these new lowercase names for ember and embercl.
-Rework projects to favor shadow builds.
-Remove the symlinks.sh file and all references to it. It was never needed. Instead, just specify multiple include and link paths in the .pro files.
-Change WIN32 to _WIN32.
-Fix a few code warnings.
-Draw selection circles around all selected xforms plus the current one.
--Bug fixes
-Add control key as a modifier to increase the amount a spinbox is changed when using right mouse drag to edit. Previously only observed shift key to decrease the value.
-Change the copy/paste selected xforms shortcuts to be Ctrl+X+C and Ctrl+X+V.
--Code changes
-Add function Fractorium::IsXformSelected() to determine if an xform has been selected with the checkboxes.
-Devices settings was empty on first run, so switching to OpenCL had no effect until the user manually selected a device in the options dialog. Fix by defaulting to device 0 if present.
-Split VariationList into .h/cpp files.
--Make VariationList.cpp the only place where the variations files are included from. This speeds up the build, but variations can no longer be directly instantiated.
--Variations are no longer exported.
-Add 4 new possible arguments to EmberGenome:
--allvars: Print the names of all supported variations.
--regvars: Print the names of all supported regular variations.
--prevars: Print the names of all supported pre variations.
--postvars: Print the names of all supported post variations.
