-Attempt to preserve xaos when adding xforms. Note this is not an exact copy, but just a preservation of some values based on position.
-Add some acceleration to the changing of spinner values when dragging the right mouse button to adjust.
-Make the pivot be the center of the viewable area when doing drag/rotate/scale with the right mouse button.
--Clamp minimum scale to 10
--Draw a line from the mouse position to the pivot.
-Keep a cache of the last added final xform with each flame so that it can be quickly added, removed, then added back for testing its effect.
--This is not saved with the xml file and is solely for interactive editing.
--Bug fixes
-File filtering in open and save dialogs were broken.
-Right clicking on integer spin boxes was causing the context menu to pop up, when it should be supressed just like double spin boxes.
-Deleting xforms was still broken.
--Code changes
-Refactor the code for adding and pasting xforms into a single global static function called AddXformsWithXaos().
-Give tabs a height of 4px in the qss files. Looks a little large on 4k screens, but just right on HD screens which are much more common.
-Allow for styling of zero and non-zero variation tree nodes via qss.
-Allow for toggling whether to interpolate between colors in the palette editor, or to do hard cuts between colors.
-Allow for adjusting spinner values with the + = or up arrow keys to increase, and - _ or down arrow keys to decrease.
-Allow for responding to global presses of + = and - _ to cycle up or down to specify which xform is set as the current one.
-Allow for adding "layers" via xaos which will add a user-specified number of xforms, and set certain xaos values to 0 or 1.
-Add a new menu item under the Edit menu to copy the OpenCL iteration kernel source to the clipboard.
-Show text on the status bar which indicates that an OpenCL kernel compilation is taking place.
-Show xform name on xform combo box when expanded. Adjust size to fit all names.
-Draw post affine circles using dashed lines.
-Prevent QSS dialog from styling its editor, which makes it easier to see text when creating styles which have custom colors for text boxes.
--Bug fixes
-Fix up some table layouts which seemed to have regressed/decayed over time for reasons unknown.
-Using undo/redo would create a new flame in the library every time.
-Solo was not being preserved when using undo/redo.
--Code changes
-Make the solo flag be a part of the flame data now.
-Fix some tabification in the OpenCL code for EllipticVariation.
-Fix tabification in the varState code for OpenCL.
-Add an event called m_CompileBegun to RendererCL that is called right before an OpenCL compile is begun.
--This required making RendererCLBase not a pure virtual base class. Member functions just return defaults.
-Filter key presses on main window to only process the third one. This is due to Qt triggering three events for every key press.
-The palette preview table was installing an event filter for seemingly no reason. Remove it.
-Mark certain virtual functions as override in SpinBox and DoubleSpinBox.
-Add two new variations, hyperbolic and hypershift2.
-Allow for animating final xforms.
-More detailed diagnostics when any action in the OpenCL renderer fails.
-Allow for creating an OpenCL renderer which does not share a texture with the main window, and instead manually copies its final output image from GPU to CPU then back to GPU.
--Bug fixes
-Text was not properly being copied out of the Info | Bounds text box.
--Code changes
-Remove Renderer::AccumulatorToFinalImage(v4F* pixels, size_t finalOffset), it's no longer needed or makes sense.
-Controllers no longer keep track of shared status, it's kept inside the renderers.
-Make getter functions in FractoriumOptionsDialog be public.
-Allow 7 decimal places in variations spinners.
-Try to prevent infinite loop that sometimes happens when drawing grid. Unsure if this actually works since it's very hard to reproduce.
-Update /debian/changelog to use a newer version of ubuntu named artful. Users will need to add that PPA to get it via apt.
-Update copyright year to 2018.
-Allow group dragging and floating of dock widgets.
--Note this has a bug where if tabls are grouped while floating, the tab position is placed on the bottom. It restores to the top when dropping on a dock location. I've filed a bug at qt.io
-Make some tables auto size to their contents because some text appeared obscured on Linux.
-The size of the xforms and palette tabs were preventing the main window from being resized to a small size on lower resolution monitors when docked. So rework scroll areas, minimum sizes and layouts to allow for a smaller main window.
-Support 4k monitors, and in general, properly scale any monitor that is not HD.
-Allow for a spatial filter of radius zero, which means do not use a spatial filter.
-Add new variations: concentric, cpow3, helicoid, helix, rand_cubes, sphereblur.
-Use a new method for computing elliptic which is more precise. Developed by Discord user Claude.
-Remove the 8 variation per xform limitation on the GPU.
-Allow for loading the last flame file on startup, rather than randoms.
-Use two different default quality values in the interactive renderer, one each for CPU and GPU.
-Creating linked xforms was using non-standard behavior. Make it match Apo and also support creating multiple linked xforms at once.
--Bug fixes
-No variations in an xform used to have the same behavior as a single linear variation with weight 1. While sensible, this breaks backward compatibility. No variations now sets the output point to zeroes.
-Prevent crashing the program when adjusting a value on the main window while a final render is in progress.
-The xaos table was inverted.
--Code changes
-Convert projects to Visual Studio 2017.
-Change bad vals from +- 1e10 to +-1e20.
-Reintroduce the symmetry tag in xforms for legacy support in programs that do not use color_speed.
-Compiler will not let us use default values in templated member functions anymore.
--Add support for Exr files which use 32-bit floats for each RGBA channel. Seems to come out too washed out.
--Allow for clearing an individual color curve.
--Allow for saving multiple image types in EmberRender and EmberAnimate. All writes are threaded.
--Remove --bpc command line argument. Add format png16 as a replacement.
--Remove --enable_jpg_comments and --enable_png_comments command line arguments, and replace them with --enable_comments which applies to jpg, png and exr.
--Add menu items to variations and affine spinners which allow for easy entry of specific numeric values like pi.
--Make final render dialog be wider rather than so tall.
Bug fixes:
--Fix some OpenCL compile errors on Mac.
--Remove ability to save bitmap files on all platforms but Windows.
Code changes:
--New dependency on OpenEXR.
--Allow Curves class to interact with objects of a different template type.
--Make m_Curves member of Ember always use float as template type.
--Set the length of the curves array to always be 2^17 which should offer enough precision with new 32-bit float pixel types.
--Set pixel types to always be 32-bit float. This results in a major reduction of code in the final accumulation part of Renderer.h/cpp.
--Remove corresponding code from RendererCL and FinalAccumOpenCLKernelCreator.
--Remove Transparency, NumChannels and BytesPerPixel setters from Renderer.h/cpp.
--Add new global functions to format final image buffers and place all alpha calculation and scaling code in them.
--Blending is no longer needed in OpenGLWidget because of the new pixel type.
--Make new class, AffineDoubleSpinBox.
--Attempt to make file save dialog code work the same on all OSes.
--Remove some unused functions.
--User changes
-Add support for adjusting xform color indices in the palette editor. Fixed palettes can now be displayed there, but they will have no color arrows as they are not editable.
-Add support for independent dimension scaling in the EmberRender and EmberAnimate programs to bring them in line with the final render dialog Fractorium.
--Bug fixes
-File paths with a space in them did not work in the command line programs.
-Any Xml file in the search paths would erroneously be treated as a palette file.
--Code changes
-Change some for loops to while loops when iterating through xforms.
-Allow FractoriumEmberController<T>::UpdateXform() to be able to apply the action to an xform at a specific index.
-Remove old code blocks build files that were never used.
-Make GetPath() return empty string if no path is present in the passed in file path.
-GetTotalXform() was always counting the final xform, even if it was unused.
-Add a palette editor.
-Add support for reading .ugr/.gradient/.gradients palette files.
-Allow toggling on spinners whose minimum value is not zero.
-Allow toggling display of image, affines and grid.
-Add new variations: cylinder2, circlesplit, tile_log, truchet_fill, waves2_radial.
--Bug fixes
-cpow2 was wrong.
-Palettes with rapid changes in color would produce slightly different outputs from Apo/Chaotica. This was due to a long standing bug from flam3.
-Use exec() on Apple and show() on all other OSes for dialog boxes.
-Trying to render a sequence with no frames would crash.
-Selecting multiple xforms and rotating them would produce the wrong rotation.
-Better handling when parsing flames using different encoding, such as unicode and UTF-8.
-Switching between SP/DP didn't reselect the selected flame in the Library tab.
--Code changes
-Make all types concerning palettes be floats, including PaletteTableWidgetItem.
-PaletteTableWidgetItem is no longer templated because all palettes are float.
-Include the source colors for user created gradients.
-Change parallel_for() calls to work with very old versions of TBB which are lingering on some systems.
-Split conditional out of accumulation loop on the CPU for better performance.
-Vectorize summing when doing density filter for better performance.
-Make all usage of palettes be of type float, double is pointless.
-Allow palettes to reside in multiple folders, while ensuring only one of each name is added.
-Refactor some palette path searching code.
-Make ReadFile() throw and catch an exception if the file operation fails.
-A little extra safety in foci and foci3D with a call to Zeps().
-Cast to (real_t) in the OpenCL string for the w variation, which was having trouble compiling on Mac.
-Fixing missing comma between paths in InitPaletteList().
-Move Xml and PaletteList classes into cpp to shorten build times when working on them.
-Remove default param values for IterOpenCLKernelCreator<T>::SharedDataIndexDefines in cpp file.
-Change more NULL to nullptr.
--User changes
-Add many tooltips to help clarify functionality.
-Select multiple flames in library for del/move. Still only one allowed to be set as the current.
-Show checkbox for current flame. Remember this is not necessarily what's selected.
-User can now drag a square to select xforms, which keeps in sync with checkboxes.
-Remove --nframes from command line. Replace with new params: --loopframes, --interpframes, --interploops.
-Add two new options to EmberGenome: --cwloops --cwinterploops to specify whether rotation should go clockwise instead of the default counter clockwise.
-Add these to Fractorium as checkboxes.
-Apply All now also works for toggling animate flag on xforms.
-Options dialog now allows user to set whether double click toggles spinners, or right click does.
--Bug fixes
-Selecting final and non-final xforms, and then dragging the non-final did not drag the final with it.
-Selecting all xforms when a final was present, then deleting crashed the program.
-Remove support for ppm files in the command line programs, it's an outdated format.
-Switching between SP and DP kept reapplying the palette adjustments.
--Code changes
-Move build system to Visual Studio 2015 and Qt 5.6.
-SSE used during addition of points to the histogram.
-Remove last remnants of old flam3 C code and replace with C++.
-Remove unused code involving tbb::task_group.
-Make settings object a global shared_ptr singleton, so it doesn't have to be passed around.
-Make stagger a double instead of a bool.
-Save stagger values to settings.
-Random stagger was being set in the wrong place.
-Save rotation values as double rather than int.
-Add animation sequence creation to Fractorium.
-Add two new options to EmberGenome which are used when generating an animation sequence.:
--startcount: Add this number to the filename of each flame.
--padding: Override the automatically calculated amount of padding zeroes added to each filename.
--Bug fixes
-Prevent filenames in command line programs from using scientific notation when rendering a large number of frames.
-Fix tab orders to match newer GUI items which were overlooked in previous releases.
-Re-render previews if transparency value in the options dialog was changed. Re-rendering was previously only done if early clip or y axis up was changed.
-Use transparency when rendering thumbnail previews.
--Code changes
-Wrap EmberCommon.h in a namespace called EmberCommon.
-Move FormatName() from EmberGenome to EmberCommon.h/cpp
-Add a prefix parameter to EmberFile::DefaultFilename() to allow for creating a default filename for sequences.
-When showing the final render dialog, allow specifying where it came from: the toolbar or the render sequence button.
-Refactor all preview rendering code out into its own class hierarchy with overrides for the main window and the final render dialog.
-Remove all preview render cancelling functions, they are now built into the new class hierarchy and a new render will not start until the previous one is stopped.
-Add two new function ConstrainLow() and ConstrainHigh() which wrap constraining two min/max spinboxes to each others' values.
-Add a bool to FractoriumEmberControllerBase::CopyEmberFile() to specify whether to copy the main file or the sequence file. This is somewhat of a hack and was done in a rush.
-Add a bool to FractoriumEmberControllerBase::SetEmberFile() to specify whether to move the file rather than copy. This is used in FinalRenderEmberController and improves efficiency.
-Add wrapper functions for variations filter dialog settings.
-Remove the option --intpalette to format the palette in the xml as ints. If they are not hex formatted, then they should always be float. This option was pointless.
-Cleanup some options text for the command line programs.
-Allow for dragging around flames in the library tab. This is useful for setting up the order of an animation.
-Make the opening of large files in Fractorium much more efficient when not-appending.
-Make the opening of large files in all EmberRender and EmberAnimate more efficient.
-Better error reporting when opening files.
--Bug fixes
-Get rid of leftover artifacts that would appear on preview thumbnails when either switching SP/DP or re-rendering previews.
-Filename extension was not being appended on Linux when saving as Xml, thus making it impossible to drag that file back in becase drop is filtered on extension.
--Code changes
-Move GCC compiler spec to C++14. Building with 5.3 now on linux.
-Use inline member data initializers.
-Make a #define for static for use in Utils.h to make things a little cleaner.
-Make various functions able to take arbitrary collections as their parameters rather than just vectors.
-Make library collection a list rather than vector. This alleviates the need to re-sync pointers whenever the collection changes.
-Subclass QTreeWidget for the library tree. Two new files added for this.
-Remove all usage of #ifdef ROW_ONLY_DE in DEOpenCLKernelCreator, it was never used.
-Add move constructor and assignment operator to EmberFile.
-Add the ability to use a pointer to outside memory in the renderer for the vector of Ember<T>.
-Make a lot more functions const where they should be.
-Better handling of crossed min/max DE filter values on the GUI.
-Changes to spatial and density filter values will no longer restart the entire render.
-Support reading cam_zoom from xml as zoom since JWildfire uses cam_zoom.
-Change drag n drop behavior: the default is now to append, hold Ctrl to overwrite.
-Set max value of zoom to 25 because it will crash with values around 28 or 29 due to numeric overflow when scaling quality.
-Update links in About Dialog.
-Rename some controls in Options Dialog.
-Move the color curves control to the Palette tab.
--Bug fixes
-Remove extra space in info tree text when dealing with a linked xform.
-Update summary xform name field whenever xform name changes.
-Get rid of selection border on summary tab xform tree cells.
-Only add variations from Xml that have a non-zero weight. There seemed to be spurious flattens coming from Apo with a weight of 0.
--Code changes
-Gutters are now a fixed size of 8 * supersample.
-Use stl data() member to get pointer to first element instead of &vec[0].
-Eliminate extra calls in renderer to ComputeBounds(), CreateSpatialFilter() and CreateTemporalFilter() to only be done at the start of a render.
-Another attempt at vectorizing LogScaleDensityFilter(). Vectorizes, but not sure if it helps.
-Some other loop optimizations in Renderer.
-No longer check temporal samples in response to some control changes, they are always 1 in the interactive renderer.
-Really fix locking of affine scale.
--Code changes
-Remove dependency projects from the solution. Move to a project design where they are built once via command line and stored in a /Deps folder.
--Because of this, libpng is built as a static lib instead of a dll because that's what its command line makefile supports.
--Remove libpng16.dll from Wix installer.
-Remove all configs except for debug and release.
-Remove all platforms except for x64.
-Add #define __TBB_NO_IMPLICIT_LINKAGE 1 to prevent tbb from locking for tbb_debug.lib by default on debug builds.
-Put Ember.rc in a filter folder in the project.
-Place pragma warning disable statements in PCH files rather than in projects. This makes it easier when using Qt Creator.
-Move all resource files to the MSVC folder.
-Set all targets in QtCreator project to their lowercase names to be more *nix friendly. Set -l link statements to use these new lowercase names for ember and embercl.
-Rework projects to favor shadow builds.
-Remove the symlinks.sh file and all references to it. It was never needed. Instead, just specify multiple include and link paths in the .pro files.
-Change WIN32 to _WIN32.
-Fix a few code warnings.
-Draw selection circles around all selected xforms plus the current one.
--Bug fixes
-Add control key as a modifier to increase the amount a spinbox is changed when using right mouse drag to edit. Previously only observed shift key to decrease the value.
-Change the copy/paste selected xforms shortcuts to be Ctrl+X+C and Ctrl+X+V.
--Code changes
-Add function Fractorium::IsXformSelected() to determine if an xform has been selected with the checkboxes.
-Allow locking of the scale at which affine circles are displayed.
-Allow user to toggle whether xform will be animated when generating sequences. Also show the animate value when loading.
--Code changes
-More conversion to C++11 style code.
-Add another value to the eXformUpdate enum called UPDATE_CURRENT_AND_SELECTED in anticipation of future work.
-Remove some old #defines.
-Add new variations: crackle, dc_perlin.
-Make default palette interp mode be linear instead of step.
-Make summary tab the selected one in the Info tab.
-Allow for highlight power of up to 10. It was previously limited to 2.
--Bug fixes
-Direct color calculations were wrong.
-Flattening was not applied to final xform.
-Fix "pure virtual function call" error on shutdown.
--Code changes
-Allow for array precalc params in variations by adding a size member to the ParamWithName class.
-In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length.
-Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin.
-Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project.
-Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern.
-Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on.
-Add missing backslash to CUDA include and library paths for builds on Nvidia systems.
-Add missing gl.h include for Windows.
-Remove glew include paths from Fractorium, it's not used.
-Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2.
-Fix bad paths on linux build.
-General cleanup.
-Add new variations: bubbleT3D, crob, hexaplay3D, hexcrop, hexes, hexnix3D, loonie2, loonie3, nBlur, octapol and synth.
-Allow for pre/post versions of dc_bubble, dc_cylinder and dc_linear whereas before they were omitted.
-When saving a file with multiple embers in it, detect if time values are all the same and if so, start them at zero and increment by 1 for each ember.
-Allow for numerous quality increases to be coalesced into one. It will pick up at the end of the current render.
-Show selection highlight on variations tree in response to mouse hover. This makes it easier to see for which variation or param the current mouse wheel action will apply.
-Make default temporal samples be 100, whereas before it was 1000 which was overkill.
-Require the shift key to be held with delete for deleting an ember to prevent it from triggering when the user enters delete in the edit box.
-This wasn't otherwise fixable without writing a lot more code.
--Bug fixes
-EmberGenome was crashing when generating a sequence from a source file with more than 2 embers in it.
-EmberGenome was improperly handling the first frame of a merge after the last frame of the loop.
-These bugs were due to a previous commit. Revert parts of that commit.
-Prevent a zoom value of less than 0 when reading from xml.
-Slight optimization of the crescents, and mask variations, if the compiler wasn't doing it already.
-Unique file naming was broken because it was looking for _# and the default names ended with -#.
-Disallow renaming of an ember in the library tree to an empty string.
-Severe bug that prevented some variations from being read correctly from params generated outside this program.
-Severe OpenCL randomization bug. The first x coordinates of the first points in the first kernel call of the first ember of a render since the OpenCL renderer object was created were not random and were mostly -1.
-Severe bug when populating xform selection distributions that could sometimes cause a crash due to roundoff error. Fix by using double.
-Limit the max number of variations in a random ember to MAX_CL_VARS, which is 8. This ensures they'll look the same on CPU and GPU.
-Prevent user from saving stylesheet to default.qss, it's a special reserved filename.
--Code changes
-Generalize using the running sum output point inside of a variation for all cases: pre, reg and post.
-Allow for array variables in variations where the address of each element is stored in m_Params.
-Qualify all math functions with std::
-No longer use our own Clamp() in OpenCL, instead use the standard clamp().
-Redesign how functions are used in the variations OpenCL code.
-Add tests to EmberTester to verify some of the new functionality.
-Place more const and override qualifiers on functions where appropriate.
-Add a global rand with a lock to be used very sparingly.
-Use a map instead of a vector for bad param names in Xml parsing.
-Prefix affine interpolation mode defines with "AFFINE_" to make their purpose more clear.
-Allow for variations that change state during iteration by sending a separate copy of the ember to each rendering thread.
-Implement this same functionality with a local struct in OpenCL. It's members are the total of all variables that need to change state within an ember.
-Add Contains() function to Utils.h.
-EmberRender: print names of kernels being printed with --dump_kernel option.
-Clean up EmberTester to handle some of the recent changes.
-Fix various casts.
-Replace % 2 with & 1, even though the compiler was likely doing this already.
-Add new file Variations06.h to accommodate new variations.
-General cleanup.
-Add a new dialog for editing QSS stylesheets. Allow for saving, reloading and setting styles as default.
--Include a dark style with the installation called dark.qss.
--Also add support for themes such as Fusion.
--Resize some controls to better fit with the new style.
-Add an option to specify the number of random embers generated on startup. 1 is the minimum and the default.
--Bug fixes
-Properly enable/disable thread priority label in final render dialog in response to enable/disable of the OpenCL checkbox.
-Remove all inline stylesheets.
-Show xaos spinners with 6 decimal places.
--Code changes
-Remove redundant comparisons to nullptr, use ! instead;
-Give some controls valid names instead of the auto generated ones.
-DoubleSpinBoxTableItemDelegate.h: Add virtual keyword to overridden functions.
-Add support for multiple GPU devices.
--These options are present in the command line and in Fractorium.
-Change scheme of specifying devices from platform,device to just total device index.
--Single number on the command line.
--Change from combo boxes for device selection to a table of all devices in Fractorium.
-Temporal samples defaults to 100 instead of 1000 which was needless overkill.
--Bug fixes
-EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority.
-VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation.
-FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull().
--Code changes
-Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion().
-EmberMotion.h: Call base constructor.
-EmberPch.h: #pragma once only on Windows.
-EmberToXml.h:
--Handle different types of exceptions.
--Add default cases to ToString().
-Isaac.h: Remove unused variable in constructor.
-Point.h: Call base constructor in Color().
-Renderer.h/cpp:
--Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU.
--Make CoordMap() return a const ref, not a pointer.
-SheepTools.h:
--Use 64-bit types like the rest of the code already does.
--Fix some comment misspellings.
-Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions.
-Utils.h:
--Add new functions Equal() and Split().
--Handle more exception types in ReadFile().
--Get rid of most legacy blending of C and C++ argument parsing.
-XmlToEmber.h:
--Get rid of most legacy blending of C and C++ code from flam3.
--Remove some unused variables.
-EmberAnimate:
--Support multi-GPU processing that alternates full frames between devices.
--Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option.
--Remove bucketT template parameter, and hard code float in its place.
--If a render fails, exit since there is no point in continuing an animation with a missing frame.
--Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before.
--Remove some unused variables.
-EmberGenome, EmberRender:
--Support multi-GPU processing that alternates full frames between devices.
--Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option.
--Remove bucketT template parameter, and hard code float in its place.
-EmberRender:
--Support multi-GPU processing that alternates full frames between devices.
--Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option.
--Remove bucketT template parameter, and hard code float in its place.
--Only print values when not rendering with OpenCL, since they're always 0 in that case.
-EmberCLPch.h:
--#pragma once only on Windows.
--#include <atomic>.
-IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU.
-OpenCLWrapper.h:
--Move all OpenCL info related code into its own class OpenCLInfo.
--Add members to cache the values of global memory size and max allocation size.
-RendererCL.h/cpp:
--Redesign to accomodate multi-GPU.
--Constructor now takes a vector of devices.
--Remove DumpErrorReport() function, it's handled in the base.
--ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter.
--MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit.
--Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing.
--m_Calls member removed, as it's now per-device.
--OpenCLWrapper removed.
--m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device.
--Added member m_Devices, a vector of unique_ptr of RendererCLDevice.
-EmberCommon.h
--Added Devices() function to convert from a vector of device indices to a vector of platform,device indices.
--Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices.
--Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device.
--Add more comments to some existing functions.
-EmberCommonPch.h: #pragma once only on Windows.
-EmberOptions.h:
--Remove --platform option, it's just sequential device number now with the --device option.
--Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image.
--Add Devices() function to parse comma separated --device option string and return a vector of device indices.
--Make int and uint types be 64-bit, so intmax_t and size_t.
--Make better use of macros.
-JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref.
-All project files: Turn off buffer security check option in Visual Studio (/Gs-)
-deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems.
-Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link.
-EmberCL.pro: Add new files for multi-GPU support.
-build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake}
-shared_settings.pri:
-Add version string.
-Remove old DESTDIR definitions.
-Add the following lines or else nothing would build:
CONFIG(release, debug|release) {
CONFIG += warn_off
DESTDIR = ../../../Bin/release
}
CONFIG(debug, debug|release) {
DESTDIR = ../../../Bin/debug
}
QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t))
LIBS += -L/usr/lib -lpthread
-AboutDialog.ui: Another futile attempt to make it look correct on Linux.
-FinalRenderDialog.h/cpp:
--Add support for multi-GPU.
--Change from combo boxes for device selection to a table of all devices.
--Ensure device selection makes sense.
--Remove "FinalRender" prefix of various function names, it's implied given the context.
-FinalRenderEmberController.h/cpp:
--Add support for multi-GPU.
--Change m_FinishedImageCount to be atomic.
--Move CancelRender() from the base to FinalRenderEmberController<T>.
--Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread.
--Consolidate setting various renderer fields into SyncGuiToRenderer().
-Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table.
-FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system.
-FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed.
-FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used.
-FractoriumSettings.h/cpp:
--Temporal samples defaults to 100 instead of 1000 which was needless overkill.
--Add multi-GPU support, remove old device,platform pair.
-FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system.
-FractoriumOptionsDialog.h/cpp:
--Add support for multi-GPU.
--Consolidate more assignments in DataToGui().
--Enable/disable CPU/OpenCL items in response to OpenCL checkbox event.
-Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
-Remove Hue as a saved parameter, as well as animation parameters associated with it. It's now a GUI-only field that is never saved.
-Make histogram, density filter buffer, and all associated fields always float, even when using double. In that case, only the iteration calculations are now double. Suggested by Thomas Ludwig.
-Print all three kernels in EmberRender when the --dump_kernel option is specified.
-Apply variations filter to randoms.
--Bug fixes
-Fix bug where hue was not being preserved when switching controllers and embers. Very hard to repro bug, but mostly overcome by eliminating hue as a saved parameter.
--Code changes
-De-templatized DEOpenCLKernelCreator and FinalAccumOpenCLKernelCreator. They now just take a bool as a parameter to specify double precision.
-To accommodate the buffers being float, introduce a new #define types in EmberCL called real4_bucket, and real4reals_bucket.
-Density and spatial filtering structs now use this type.
-ConvertDensityFilter() and ConvertSpatialFilter() no longer return a value, they just assign to the member.
-Nvidia OpenCL compilation was broken for density filtering due to ambiguity in the arguments to min(). Fix it by casting.
-Put Nvidia block size in DE back to 24 where it used to be. Nvidia fails when it's 32.
-Fix misspelling of the word "Rendering" in failure messages in final render dialog.
-Put FillSummary() back when loading an ember.
-Properly disable add final xform button when a final xform is present.
Native menu bar recreation is hooked up to the focusWindowChanged signal in
QGuiApplication. Emittng this when the window is shown ensures that Qt
creates the menubar at the correct time.
Fixesgh2k/fractorium#1
-Add variations filter/selection dialog.
--Bug fixes
-Fix summary window not properly indicating the presence of pose affine.
-Remove a file named Fractorium.aps which had been erroneously committed a year ago.
--Code changes
-Use qobject_cast instead of dynamic_cast where appropriate.
-Add more override keyword where appropriate.
-Add variations list to settings for filter dialog.
-Add Summary tab to the info dock, place existing bounds related info in a new Bounds tab.
-Add a toolbar with the most common actions on it.
-Remove old toolbar at the top of the library tab.
--Code changes
-Refactor code to make a color visible on a background into VisibleColor() in FractoriumCommon.h
-Add IsXformLinked() to determine if an xform is linked to another.
-Remove SetPaletteRefTable() and GetQRgbFromPaletteIndex() from FractoriumEmberControllerBase and its derivations, unused.
-Add FillSummary() to FractoriumEmberController. Call in Update(), UpdateXform() and other places where values are changed to force an update of the summary view.
-Add export statements to FractoriumInfo.cpp.
-Remove image parameter from SetPaletteTableItem(), it was a bad design.
-InitToolbarUI() is now empty since toolbar initialization happens automatically. Leave as a placeholder.
-Refactor code to get a palette color at a given index and convert it to a QColor to ColorIndexToQColor().
-Eliminate delay when switching between single and double precision.
--Code changes
-Variation tree and associated widgets no longer actually contain variation objects, only IDs.
-Better default/min/max sizes for docks/tabs.
-Add a reset workspace menu item.
--Bug fixes
-Order of affine scale up/down buttons was reversed from what's intuitive.
-Projection was not properly being set when animating flames with 3D parameters.
Allow for detaching of top level tabs in the dock widget so workspaces can be customized.
Save workspace between runs.
Only correct variation names/params during parsing when the source of the Xml file is not from Ember/Fractorium.
Allow for setting rendering thread priorities from the command line and final render dialog. Currently only implemented on Windows.
Show estimated time left on the final render dialog.
Sort palette list by name, instead of by index in the palette file.
Sorting can be flipped by clicking the column headers of the palette table.
--Code changes
Remove unnecessary connect() statement in Variations tab.
More efficient table on the Xaos tab when using xaos on a flame with a large number of xforms.
--Code changes
Use QTableView instead of QTableWidget for the xaos table.
Add custom DoubleSpinBoxTableItemDelegate for this.
Make row and column toggling functions work for QTableView and QTableWidget.
Remove some dead code from Fractorium.h/cpp
Miscellaneous hacks to keep it building on Linux.
Add the ability to set the current xform by pressing F1 - F32.
Add the ability to toggle an entire row or column of xaos values.
--Bug fixes
Prevent xform index flickering whenever changing the number of xforms.
--Code changes
Remove ForEach() wrappers and replace with range based for loops with auto.
Replace every regular for loop with a range based one where applicable. Note this doesn't work everywhere.
Make event filter application wide.
Add parameter to FillXforms() to specify the index to select, default 0.
Rename some scroll areas and layouts to names that make sense, rather than their designer defaults.
Add the ability to apply operations to a selection of xforms, rather than just the current one.
Update tool tips accordingly.
--Bug fixes
Fix NAN in equalized weight calculation when all weights are set to 0.
--Code changes
Clean up strange nested usage of Update([&]()) calls when changing xform color index via either the spinner or scroll bar. Made no sense.
Make ISAAC RandBit() use RandByte() to be slightly more efficient.
Put FillXforms() in the controller where it belongs, rather than the main window class.
Add UpdateXform() function to the controller to handle applying operations to multiple xforms.
Remove the word "Current" out of most xform related functions because they now operate on whatever is selected.
Properly use Update() for various xform operations whereas before it was manually calling UpdateRender().
Also properly use Update() in places where it was erroneously using UpdateXform() for things that did not involve xforms.
Block signals in FillXaosTable().
Add new file named FractoriumXformsSelect.cpp to handle new xform selection code.
Add Curves.h, and CurvesGraphicsView.h/cpp to support bezier color curves.
Add Curves member to Ember.
Add curves capability to EmberCL.
Remove some unused variables in the kernel created in RendererCL::CreateFinalAccumKernelString().
Use glm namespace for vec classes if GLM_VERSION >= 96, else use glm::detail.
As a result of using glm namespace, all instances of min and max had to be qualified with std::
Split ComputeCamera into that and ComputeQuality().
Reduce the amount of ComputeCamera() and MakeDmap() calls on each incremental iter that doesn't use temporal samples.
Fix clamping bug with DE filter widths.
Provide functions to return the kernels from RendererCL to assist with diagnostics and debugging.
Prevent extra newline in EmberRender when only rendering a single image.
Add the ability to delete an ember at a given index in EmberFile.
Allow deleting/focusing ember in library tab with delete and enter keys.
Reorder some code in Fractorium.h to match the tabs order.
Add and call ClearFinalImages() to clear buffers in controller to fix bug where previous CPU render would be shown for a split second when switching from OpenCL back to CPU.
Refactor ember library pointer syncing to a function SyncPointers().
Add the ability to save ember Xmls to an unique automatically generated name after the first time the user has specified a name.
--User changes
Use actual strips count when computing memory requirements in the final render dialog.
Output CL_DEVICE_ADDRESS_BITS when passing --openclinfo to command line programs.
Warn if single/total allocations are greater than the max allowed for OpenCL in the final render dialog.
Make about box properly sized for different fonts.
Dock widget is slightly resizable now.
Center scroll area when loading a new ember.
--Bug Fixes
Fix bad values left in an ember when a render with strips > 1 fails in the final render dialog.
Fix incorrect calculation in dc_cube variation when using OpenCL.
--Code Changes
Major work to get it running on Linux.
Migrate from QGLWidget to QOpenGLWidget.
Delayed init due to QOpenGLWidget.
Break RendererBase::MemoryRequired() into two functions, it and HistMemRequired() and return a tuple.
Add GlobalMemSize() and MaxAllocSize() functions in OpenCLWrapper.
Change CHOOSE_XFORM_GRAIN to be 16384, so we can & with 16383 instead of using modulo when selecting an xform. This results in a 9% speed increase on the CPU.
Save each newly loaded ember in a file called "last.flame" in the executable folder. This will help diagnose crashes that occur when switching embers.
Use nullptr instead of NULL in the Fractorium project. It had previously been done in all other places.
