-Fix variations: blob2 (broken on CPU), epispiral, hole.
-Fix reading variations from Apophysis: supershape.
-Bump render was broken.
--Code changes
-Flip precalc sina/cosa and apply everywhere by flipping the usage. Flam3 had these reversed and it made the code confusing to read.
-Improve performance in the following variations: cpow2, dc_cube, julia3d, julia3dz, julian2, log_db, nblur, npolar, waffle, wavesn, xtrb.
--Code changes
-Rand range now uses multiply + shift rather than modulo.
-Fix xform selection logic to prevent selecting hidden pre and post xforms.
-Add hex_modulus.
--Bug fixes
-starblur was wrong.
--Code changes
-Optimize Truchet_hex_crop, Truchet_hex_fill.
-Cleanup Truchet_inv.
-Add new file Variations08.h, and move Gnarly and inkdrop there.
-Add new variations waves22, waves23, waves42, waves3 and waves4 from user tatasz.
-Add new stylesheet called lightdark.qss which gives a more modern look to the dark theme. Started by Michel Mastriani (triptychaos).
--Included in the qmake and Wix installers.
--Code changes
-Add a new C# project that attempts to convert Apophysis plugins to Fractorium style Variation classes. It's not entirely perfect, but gets most of the job done much more quickly than doing so manually.
-Remove unused OpenCL functions from variations: elliptic, poincare, mask, bMod, bSwirl, bTransform, bCollide, farblur, popcorn2_3D, falloff, falloff2, falloff3, crackle2, waves2b, hypercrop, depth_gaussian2, depth_sine, depth_sine2, dust, asteria, vibration, vibration2, arctanh, smartshape, squares, starblur2, Truchet,.
-Add code in EmberTester to automatically detect such unused functions.
-Show common folder locations such as documents, downloads, pictures in the sidebar in all file dialogs.
-Warning message about exceeding memory in final render dialog now suggests strips as the solution to the problem.
-Strips now has a tooltip explaining what it does.
-Allow more digits in the spinners on the color section the flame tab.
-Add manually adjustable size spinners in the final render dialog. Percentage scale and absolute size are fully synced.
-Default prefix in final render is now the filename when doing animations (coming from sequence section of the library tab).
-Changed the elliptic variation back to using a less precise version for float, and a more precise version for double. The last release had it always using double.
-New applied xaos table that shows a read-only view of actual weights by taking the base xform weights and multiplying them by the xaos values.
-New table in the xaos tab that gives a graphical representation of the probability that each xform is chosen, with and without xaos.
-Add button to transpose the xaos rows and columns.
-Add support for importing .chaos files from Chaotica.
--Pasting back to Chaotica will work for most, but not all, variations due to incompatible parameter names in some.
-Curves are now splines instead of Bezier. This adds compatibility with Chaotica, but breaks it for Apophysis. Xmls are still pastable, but the color curves will look different.
--The curve editor on the palette tab can now add points by clicking on the lines and remove points by clicking on the points themselves, just like Chaotica.
--Splines are saved in four new xml fields: overall_curve, red_curve, green_curve and blue_curve.
-Allow for specifying the percentage of a sub batch each thread should iterate through per kernel call when running with OpenCL. This gives a roughly 1% performance increase due to having to make less kernel calls while iterating.
--This field is present for interactive editing (where it's not very useful) and in the final render dialog.
--On the command line, this is specified as --sbpctth for EmberRender and EmberAnimate.
-Allow double clicking to toggle the supersample field in the flame tab between 1 and 2 for easily checking the effect of the field.
-When showing affine values as polar coordinates, show angles normalized to 360 to match Chaotica.
-Fuse Count spinner now toggles between 15 and 100 when double clicking for easily checking the effect of the field.
-Added field for limiting the range in the x and y direction that the initial points are chosen from.
-Added a field called K2 which is an alternative way to set brightness, ignored when zero.
--This has no effect for many variations, but hs a noticeable effect for some.
-Added new variations:
arcsech
arcsech2
arcsinh
arctanh
asteria
block
bwraps_rand
circlecrop2
coth_spiral
crackle2
depth_blur
depth_blur2
depth_gaussian
depth_gaussian2
depth_ngon
depth_ngon2
depth_sine
depth_sine2
dragonfire
dspherical
dust
excinis
exp2
flipx
flowerdb
foci_p
gaussian
glynnia2
glynnsim4
glynnsim5
henon
henon
hex_rand
hex_truchet
hypershift
lazyjess
lens
lozi
lozi
modulusx
modulusy
oscilloscope2
point_symmetry
pointsymmetry
projective
pulse
rotate
scry2
shift
smartshape
spher
squares
starblur2
swirl3
swirl3r
tanh_spiral
target0
target2
tile_hlp
truchet_glyph
truchet_inv
truchet_knot
unicorngaloshen
vibration
vibration2
--hex_truchet, hex_rand should always use double. They are extremely sensitive.
--Bug fixes:
-Bounds sign was flipped for x coordinate of world space when center was not zero.
-Right clicking and dragging spinner showed menu on mouse up, even if it was very far away.
-Text boxes for size in final render dialog were hard to type in. Same bug as xform weight used to be so fix the same way.
-Fix spelling to be plural in toggle color speed box.
-Stop using the blank user palette to generate flames. Either put colored palettes in it, or exclude it from randoms.
-Clicking the random palette button for a palette file with only one palette in it would freeze the program.
-Clicking none scale in final render did not re-render the preview.
-Use less precision on random xaos. No need for 12 decimal places.
-The term sub batch is overloaded in the options dialog. Change the naming and tooltip of those settings for cpu and opencl.
--Also made clear in the tooltip for the default opencl quality setting that the value is per device.
-The arrows spinner in palette editor appears like a read-only label. Made it look like a spinner.
-Fix border colors for various spin boxes and table headers in the style sheet. Requires reload.
-Fix a bug in the bwraps variation which would produce different results than Chaotica and Apophysis.
-Synth was allowed to be selected for random flame generation when using an Nvidia card but it shouldn't have been because Nvidia has a hard time compiling synth.
-A casting bug in the OpenCL kernels for log scaling and density filtering was preventing successful compilations on Intel iGPUs. Fixed even though we don't support anything other than AMD and Nvidia.
-Palette rotation (click and drag) position was not being reset when loading a new flame.
-When the xform circles were hidden, opening and closing the options dialog would improperly reshow them.
-Double click toggle was broken on integer spin boxes.
-Fixed tab order of some controls.
-Creating a palette from a jpg in the palette editor only produced a single color.
--Needed to package imageformats/qjpeg.dll with the Windows installer.
-The basic memory benchmark test flame was not really testing memory. Make it more spread out.
-Remove the temporal samples field from the flame tab, it was never used because it's only an animation parameter which is specified in the final render dialog or on the command line with EmberAnimate.
--Code changes:
-Add IsEmpty() to Palette to determine if a palette is all black.
-Attempt to avoid selecting a blank palette in PaletteList::GetRandomPalette().
-Add function ScanForChaosNodes() and some associated helper functions in XmlToEmber.
-Make variation param name correction be case insensitive in XmlToEmber.
-Report error when assigning a variation param value in XmlToEmber.
-Add SubBatchPercentPerThread() method to RendererCL.
-Override enterEvent() and leaveEvent() in DoubleSpinBox and SpinBox to prevent the context menu from showing up on right mouse up after already leaving the spinner.
-Filtering the mouse wheel event in TableWidget no longer appears to be needed. It was probably an old Qt bug that has been fixed.
-Gui/ember syncing code in the final render dialog needed to be reworked to accommodate absolute sizes.
-Add buttons to copy and paste affine transforms.
-Show xform names on the column headers of the xaos table.
-Add a color-coded third column to the variations tree which shows any properties of each variation which are non-standard.
-Draw a transparent circle over hovered xforms.
-Change how xforms respond to dragging. Rotate only is now the default, and scale will only happen with shift.
--Optionally do scale and rotate when holding shift, via a setting in the options dialog.
--Bug fixes
-Snapping when dragging was wrong sometimes.
-The program would very rarely crash on startup due to some values being in an uninitialized state.
--Code changes
-Change almost every variation to use fma() in OpenCL when doing computations of the form a * b + c. This provides a slight speedup, mostly in double precision mode.
-Also apply fma() to affine calcs.
-Cleanup of OpenGL affine drawing code.
-Separate the concept of hovering and selecting xforms.
-Support 4k monitors, and in general, properly scale any monitor that is not HD.
-Allow for a spatial filter of radius zero, which means do not use a spatial filter.
-Add new variations: concentric, cpow3, helicoid, helix, rand_cubes, sphereblur.
-Use a new method for computing elliptic which is more precise. Developed by Discord user Claude.
-Remove the 8 variation per xform limitation on the GPU.
-Allow for loading the last flame file on startup, rather than randoms.
-Use two different default quality values in the interactive renderer, one each for CPU and GPU.
-Creating linked xforms was using non-standard behavior. Make it match Apo and also support creating multiple linked xforms at once.
--Bug fixes
-No variations in an xform used to have the same behavior as a single linear variation with weight 1. While sensible, this breaks backward compatibility. No variations now sets the output point to zeroes.
-Prevent crashing the program when adjusting a value on the main window while a final render is in progress.
-The xaos table was inverted.
--Code changes
-Convert projects to Visual Studio 2017.
-Change bad vals from +- 1e10 to +-1e20.
-Reintroduce the symmetry tag in xforms for legacy support in programs that do not use color_speed.
-Compiler will not let us use default values in templated member functions anymore.
-Attempt to fix several OpenCL build errors that were occurring on Mac.
--Code changes
-Improve the coloring code during final accum by getting rid of the last remnants of unnecessary scaling to 255 from flam3.
-Begin work of supporting 16bpc on the GPU.
--User changes
-dark.qss is now per-OS.
-Properly set/reload palette when coming from the palette editor. The latter must be done if they've modified the current palette even if they've clicked cancel.
--Bug fixes
-Make the following variations safer by using Zeps(): conic, bipolar, edisc, whorl, tan, csc, cot, tanh, sech, csch, coth, auger, bwraps, hypertile3d, hypertile3d1, ortho, poincare, rational3, barycentroid, sschecks, cscq, cschq, scry_3D, splitbrdr, hexcrop, nblur, crob.
-Fix bug enabling/disabling overwrite button in palette editor.
-Small optimization for gdoffs, use precalcAtanYX.
-Properly propagate z through circlesplit, cylinder2 and tile_log variations.
-Some values in truchet_fill could've been NaN.
--Code changes
-Make most installation files read only.
-Qualify many calls with std:: to ensure they're not colliding with glm::
-Use auto in more places.
-Make usage of VarFuncs more consistent by moving some global functions there.
-Make CircleTrans1 a little safer by calling Zeps() on m_Sc during precalc.
-Begin prepping for 0.9.9.5 release.
-Fix crash when using Lanczos2 filter with color curves due to negative numbers. Fix by passing abs() of first argument to pow() in Renderer::GammaCorrection().
-Fix crash in hexes with SP. Rounding error caused out of bounds index.
-Split VariationList into .h/cpp files.
--Make VariationList.cpp the only place where the variations files are included from. This speeds up the build, but variations can no longer be directly instantiated.
--Variations are no longer exported.
-Allow for pausing the renderer in the main window. This makes is more efficient when entering many parameters, such as when following a tutorial.
-Add support for new variations: erf, gamma, jac_cn, jac_dn, jac_sn, logDB, pressure_wave, pRose3D, splits3D, w, waves2b, x, xerf, y, z.
-Inform user of the start and stop of file parsing in EmberAnimate because the files could potentially be very large.
-Move the follwing fields to a new table called Animation: Interpolation, Affine Interpolation, Temporal Samples, Temporal Filter Width, Temporal Filter Type.
-These currently have no effect on the interactive renderer and instead are used when running flames through EmberGenome to generate sequences, and then animating them in Fractorium or EmberAnimate.
-Add new parameter overrides for EmberRender and EmberAnimate which directly assign values to all flames being rendered, rather than scale:
--quality
--demin
--demax
--Bug fixes
-Left pad instead of right pad names of sequence outputs from EmberGenome.
-Unique file naming was broken for files which already had an underscore in them.
-Properly report that png is the default format of EmberRender and EmberAnimate output instead of erroneously claiming it was jpg.
-Make command line programs search these folders in this order for the palette file:
./
~/.fractorium
~/.config/fractorium
/usr/share/fractorium
/usr/local/share/fractorium
-Fix possible bad values in hexes.
-Better assignment of Z variables.
-Fix boarders due to use of poorly implemented rint() function from flam3. Use std::rint() now.
-wedge_sph was completely wrong due to having accidentally swapped the mapping of two parameters.
-Make juliascope juliascope_power parameter be of type REAL_NONZERO since it's used as a denominator.
-Make Z assignment compatible with the originals in:
-arch, bcircle, bCollide, bent, bent2, bisplit, blob, blur_linear, blur_square, bMod, boarders, boarders2, bSwirl, bTransform, butterfly, cardioid, cell, circleblur, circlize, circlize2, circus, collideoscope, cos, cosine, cosh, coth, cpow, cpow2, crescents, cropn, csc, csch, curl, curve, dc_gridout, deltaa, diamond, disc2, eclipse, eCollide, edisc, eJulia, elliptic, eMod, eMotion, ennepers, epispiral, ePush, eRotate, eScale, eSwirl, ex, exp, expo, exponential, fan, fdisc, fibonacci, fibonacci2, fisheye, flipcircle, flipy, flower, flux, funnel, glynnia, GlynnSim1, GlynnSim2, GlynnSim3, gridout, handkerchief, heart, hole, idisc, julia, julian2, juliaNab, kaleidoscope, lazyTravis, Lissajous, mask, MobiusN, mobius_strip, modulus, murl, murl2, npolar, ortho, oscilloscope, parabola, perspective, petal, phoenix_julia, pie (was also inconsistent between cpu and gpu), poincare, popcorn, popcorn2, power, pow_block, rational3, rays, rblur, rings, rippled, roundspher, sec, secant2, sigmoid, sin, sineblur, sinh, sinusgrid, sphericaln, spiralwing, spirograph, split, squarize, squirrel, squish, sschecks, starblur, stripes, stwin, super_shape, tan, tancos, tangent, tanh, TwinTrian, twoface, unpolar, waves, wavesn, wedge_julia, whorl, xheart, zblur, zscale.
--Code changes
-Generalize Variation::PrecalcHelper() and rename to PrePostPrecalcHelper().
--Do the same for the OpenCL version and rename it PrePostPrecalcOpenCLString().
-Rename Variation::m_AssignType to m_PrePostAssignType since it's only relevant to pre/post variations.
-Add post_smartcrop.
--Bug fixes
-Fix bug in crackle.
-Wrong point assignment in hexaplay3D, hexnix3D.
-Improper Z assignment in rblur.
-Fix inconsistency with original in circlecrop.
-Put EMBER_ROOT bakc to ./../../../ in default.pri. This is TBD.
--Code changes
-Convert all enums to class enum to be consistent with C++11 style.
-Convert some if/else statements in filter classes to case statements.
-Add overloaded stream operators to print various enums.
-Optimize crob, nBlur.
-Fix weird assignment statement in falloff3.
-Cleanup in VarFuncs::SimplexNoise3D().
-Replace fabs() with std::abs().
-General cleanup.
-Convert all enums to class enum to be consistent with C++11 style.
-Convert some if/else statements in filter classes to case statements.
-Add overloaded stream operators to print various enums.
-Add new variations: bubbleT3D, crob, hexaplay3D, hexcrop, hexes, hexnix3D, loonie2, loonie3, nBlur, octapol and synth.
-Allow for pre/post versions of dc_bubble, dc_cylinder and dc_linear whereas before they were omitted.
-When saving a file with multiple embers in it, detect if time values are all the same and if so, start them at zero and increment by 1 for each ember.
-Allow for numerous quality increases to be coalesced into one. It will pick up at the end of the current render.
-Show selection highlight on variations tree in response to mouse hover. This makes it easier to see for which variation or param the current mouse wheel action will apply.
-Make default temporal samples be 100, whereas before it was 1000 which was overkill.
-Require the shift key to be held with delete for deleting an ember to prevent it from triggering when the user enters delete in the edit box.
-This wasn't otherwise fixable without writing a lot more code.
--Bug fixes
-EmberGenome was crashing when generating a sequence from a source file with more than 2 embers in it.
-EmberGenome was improperly handling the first frame of a merge after the last frame of the loop.
-These bugs were due to a previous commit. Revert parts of that commit.
-Prevent a zoom value of less than 0 when reading from xml.
-Slight optimization of the crescents, and mask variations, if the compiler wasn't doing it already.
-Unique file naming was broken because it was looking for _# and the default names ended with -#.
-Disallow renaming of an ember in the library tree to an empty string.
-Severe bug that prevented some variations from being read correctly from params generated outside this program.
-Severe OpenCL randomization bug. The first x coordinates of the first points in the first kernel call of the first ember of a render since the OpenCL renderer object was created were not random and were mostly -1.
-Severe bug when populating xform selection distributions that could sometimes cause a crash due to roundoff error. Fix by using double.
-Limit the max number of variations in a random ember to MAX_CL_VARS, which is 8. This ensures they'll look the same on CPU and GPU.
-Prevent user from saving stylesheet to default.qss, it's a special reserved filename.
--Code changes
-Generalize using the running sum output point inside of a variation for all cases: pre, reg and post.
-Allow for array variables in variations where the address of each element is stored in m_Params.
-Qualify all math functions with std::
-No longer use our own Clamp() in OpenCL, instead use the standard clamp().
-Redesign how functions are used in the variations OpenCL code.
-Add tests to EmberTester to verify some of the new functionality.
-Place more const and override qualifiers on functions where appropriate.
-Add a global rand with a lock to be used very sparingly.
-Use a map instead of a vector for bad param names in Xml parsing.
-Prefix affine interpolation mode defines with "AFFINE_" to make their purpose more clear.
-Allow for variations that change state during iteration by sending a separate copy of the ember to each rendering thread.
-Implement this same functionality with a local struct in OpenCL. It's members are the total of all variables that need to change state within an ember.
-Add Contains() function to Utils.h.
-EmberRender: print names of kernels being printed with --dump_kernel option.
-Clean up EmberTester to handle some of the recent changes.
-Fix various casts.
-Replace % 2 with & 1, even though the compiler was likely doing this already.
-Add new file Variations06.h to accommodate new variations.
-General cleanup.
-Add support for multiple GPU devices.
--These options are present in the command line and in Fractorium.
-Change scheme of specifying devices from platform,device to just total device index.
--Single number on the command line.
--Change from combo boxes for device selection to a table of all devices in Fractorium.
-Temporal samples defaults to 100 instead of 1000 which was needless overkill.
--Bug fixes
-EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority.
-VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation.
-FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull().
--Code changes
-Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion().
-EmberMotion.h: Call base constructor.
-EmberPch.h: #pragma once only on Windows.
-EmberToXml.h:
--Handle different types of exceptions.
--Add default cases to ToString().
-Isaac.h: Remove unused variable in constructor.
-Point.h: Call base constructor in Color().
-Renderer.h/cpp:
--Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU.
--Make CoordMap() return a const ref, not a pointer.
-SheepTools.h:
--Use 64-bit types like the rest of the code already does.
--Fix some comment misspellings.
-Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions.
-Utils.h:
--Add new functions Equal() and Split().
--Handle more exception types in ReadFile().
--Get rid of most legacy blending of C and C++ argument parsing.
-XmlToEmber.h:
--Get rid of most legacy blending of C and C++ code from flam3.
--Remove some unused variables.
-EmberAnimate:
--Support multi-GPU processing that alternates full frames between devices.
--Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option.
--Remove bucketT template parameter, and hard code float in its place.
--If a render fails, exit since there is no point in continuing an animation with a missing frame.
--Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before.
--Remove some unused variables.
-EmberGenome, EmberRender:
--Support multi-GPU processing that alternates full frames between devices.
--Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option.
--Remove bucketT template parameter, and hard code float in its place.
-EmberRender:
--Support multi-GPU processing that alternates full frames between devices.
--Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option.
--Remove bucketT template parameter, and hard code float in its place.
--Only print values when not rendering with OpenCL, since they're always 0 in that case.
-EmberCLPch.h:
--#pragma once only on Windows.
--#include <atomic>.
-IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU.
-OpenCLWrapper.h:
--Move all OpenCL info related code into its own class OpenCLInfo.
--Add members to cache the values of global memory size and max allocation size.
-RendererCL.h/cpp:
--Redesign to accomodate multi-GPU.
--Constructor now takes a vector of devices.
--Remove DumpErrorReport() function, it's handled in the base.
--ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter.
--MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit.
--Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing.
--m_Calls member removed, as it's now per-device.
--OpenCLWrapper removed.
--m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device.
--Added member m_Devices, a vector of unique_ptr of RendererCLDevice.
-EmberCommon.h
--Added Devices() function to convert from a vector of device indices to a vector of platform,device indices.
--Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices.
--Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device.
--Add more comments to some existing functions.
-EmberCommonPch.h: #pragma once only on Windows.
-EmberOptions.h:
--Remove --platform option, it's just sequential device number now with the --device option.
--Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image.
--Add Devices() function to parse comma separated --device option string and return a vector of device indices.
--Make int and uint types be 64-bit, so intmax_t and size_t.
--Make better use of macros.
-JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref.
-All project files: Turn off buffer security check option in Visual Studio (/Gs-)
-deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems.
-Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link.
-EmberCL.pro: Add new files for multi-GPU support.
-build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake}
-shared_settings.pri:
-Add version string.
-Remove old DESTDIR definitions.
-Add the following lines or else nothing would build:
CONFIG(release, debug|release) {
CONFIG += warn_off
DESTDIR = ../../../Bin/release
}
CONFIG(debug, debug|release) {
DESTDIR = ../../../Bin/debug
}
QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t))
LIBS += -L/usr/lib -lpthread
-AboutDialog.ui: Another futile attempt to make it look correct on Linux.
-FinalRenderDialog.h/cpp:
--Add support for multi-GPU.
--Change from combo boxes for device selection to a table of all devices.
--Ensure device selection makes sense.
--Remove "FinalRender" prefix of various function names, it's implied given the context.
-FinalRenderEmberController.h/cpp:
--Add support for multi-GPU.
--Change m_FinishedImageCount to be atomic.
--Move CancelRender() from the base to FinalRenderEmberController<T>.
--Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread.
--Consolidate setting various renderer fields into SyncGuiToRenderer().
-Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table.
-FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system.
-FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed.
-FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used.
-FractoriumSettings.h/cpp:
--Temporal samples defaults to 100 instead of 1000 which was needless overkill.
--Add multi-GPU support, remove old device,platform pair.
-FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system.
-FractoriumOptionsDialog.h/cpp:
--Add support for multi-GPU.
--Consolidate more assignments in DataToGui().
--Enable/disable CPU/OpenCL items in response to OpenCL checkbox event.
-Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
-If we change OpenCLWrapper to capture build log errors, we don't need to manually concat them in RendererCL because the overridden ErrorReport() function already concatenates the errors from both classes.
-Do not define T in OpenCL programs. We already have real_t to handle this.
-Do keep the casting to real_t. However this should not be necessary because there is a command line option to do this automatically which we already use: -cl-single-precision-constant. The only reason we do this is because the Apple OpenCL compiler does not follow the standard and obviously ignores this option. Absolutely awful.
-Fix a few improper casts in the CircleTrans1 and GlynnSim1 variations.
-Add an automated OpenCL program build tester to EmberTester, as well as a cast checker.
This avoids 'ambiguous call' errors on mac.
It's probably not necessary to have changed every single instance, only the ones in functions with multiple signatures. However, it was easier and safer to do this automatically than manually.
--User Changes
Size is no longer fixed to the window size.
Size scaling is done differently in the final render dialog. This fixes several bugs.
Remove Xml saving size from settings and options dialog, it no longer applies.
Final render can be broken into strips.
Set default save path to the desktop if none is found in the settings file.
Set default output size to 1920x1080 if none is found in the settings file.
--Bug Fixes
Better memory size reporting in final render dialog.
--Code Changes
Migrate to C++11, Qt 5.3.1, and Visual Studio 2013.
Change most instances of unsigned int to size_t, and int to intmax_t.
Add m_OrigPixPerUnit and m_ScaleType to Ember for scaling purposes.
Replace some sprintf_s() calls in XmlToEmber with ostringstream.
Move more non-templated members into RendererBase.
Add CopyVec() overload that takes a per element function pointer.
Add vector Memset().
Replace '&' with '+' instead of "&" in XmlToEmber for much faster parsing.
Break strips rendering out into EmberCommon and call from EmberRender and Fractorium.
Make AddAndWriteBuffer() just call WriteBuffer().
Make AddAndWriteImage() delete the existing image first before replacing it.
Add SetOutputTexture() to RendererCL to support making new textures in response to resize events.
Remove multiple return statements in RendererCL, and replace with a bool that tracks results.
Add ToDouble(), MakeEnd(), ToString() and Exists() wrappers in Fractorium.
Add Size() wrapper in EmberFile.
Make QString function arguments const QString&, and string with const string&.
Make ShowCritical() wrapper for invoking a message box from another thread.
Add combo box to TwoButtonWidget and rename.
--Bug Fixes
Spatial filter would not be correctly recreated on subsequent runs of
differing supersample values during final render.
Fix DCBubble, Funnel, SphericalN,
Wrong logic with some usage of DO_DOUBLE. Only relevant for testing.
Use uint64 for iters/sec calculation on final render dialog. int was
overflowing on extremely fast GPU renders.
--Code Changes
Make density, spatial and temporal filters preserve the values they were
created with. This helps in determining when a new instance is needed.
Better NULL checks when copying embers and xforms.
Rename members in FractoriumEmberControllerBase.h to omit duplicating
the members declared in the base.
0.4.0.9 Beta 07/27/2014
--User Changes
Properly set tab order on all controls.
Calculate and report iters/second in the final render dialog.
Immediately draw yellow dot on xform mouse down on previously unselected
xform.
--Bug Fixes
Fix GlynnSim1, GlynnSim2, GlynnSim3 and juliaNab by ensuring the first
argument to pow() is >= 0.
Ensure OpenCL platform and device combo boxes in the final render dialog
expand as needed.
--Code Changes
Make VariationTreeSpinbox take its parent VariationTreeWidgetItem as a
constructor argument. This makes SetupVariationTree() and
VariationSpinBoxValueChanged() more efficient.
Make Interference2 and ho use fabs().
0.4.0.5 Beta 07/18/2014
--User Changes
Allow for vibrancy values > 1.
Add flatten and unflatten menu items.
Automatically flatten like Apophysis does.
Add plugin and new_linear tags to Xml to be compatible with Apophysis.
--Bug Fixes
Fix blur, blur3d, bubble, cropn, cross, curl, curl3d, epispiral, ho,
julia3d, julia3dz, loonie, mirror_x, mirror_y, mirror_z, rotate_x,
sinusoidal, spherical, spherical3d, stripes.
Unique filename on final render was completely broken.
Two severe OpenCL bugs. Random seeds were biased and fusing was being
reset too often leading to results that differ from the CPU.
Subtle, but sometimes severe bug in the setup of the xaos weights.
Use properly defined epsilon by getting the value from
std::numeric_limits, rather than hard coding 1e-6 or 1e-10.
Omit incorrect usage of epsilon everywhere. It should not be
automatically added to denominators. Rather, it should only be used if
the denominator is zero.
Force final render progress bars to 100 on completion. Sometimes they
didn't seem to make it there.
Make variation name and params comparisons be case insensitive.
--Code Changes
Make ForEach and FindIf wrappers around std::for_each and std::find_if.
