fractorium/Source/Ember/Utils.h

1045 lines
29 KiB
C
Raw Normal View History

#pragma once
#include "Isaac.h"
/// <summary>
/// Global utility classes and functions that don't really fit anywhere else, but are
/// too small to justify being in their own file.
/// </summary>
namespace EmberNs
{
#ifndef _WIN32
#define THREAD_PRIORITY_LOWEST 1
#define THREAD_PRIORITY_BELOW_NORMAL 25
#define THREAD_PRIORITY_NORMAL 50
#define THREAD_PRIORITY_ABOVE_NORMAL 75
#define THREAD_PRIORITY_HIGHEST 99
#endif
/// <summary>
/// Enum to encapsulate and add type safety to the thread priority defines.
/// </summary>
enum class eThreadPriority : int
{
LOWEST = THREAD_PRIORITY_LOWEST,//-2
BELOW_NORMAL = THREAD_PRIORITY_BELOW_NORMAL,//-1
NORMAL = THREAD_PRIORITY_NORMAL,//0
ABOVE_NORMAL = THREAD_PRIORITY_ABOVE_NORMAL,//1
HIGHEST = THREAD_PRIORITY_HIGHEST//2
};
/// <summary>
/// Thin wrapper around std::find_if() to relieve the caller of having to
/// pass the implicitly obvious .begin() and .end(), and then compare the results to .end().
/// </summary>
/// <param name="container">The container to call find_if() on</param>
/// <param name="pred">The lambda to call on each element</param>
/// <returns>True if pred returned true once, else false.</returns>
template<class c, class pr>
static inline bool FindIf(c& container, pr pred)
{
return std::find_if(container.begin(), container.end(), pred) != container.end();
}
--User changes -Add new variations: bubbleT3D, crob, hexaplay3D, hexcrop, hexes, hexnix3D, loonie2, loonie3, nBlur, octapol and synth. -Allow for pre/post versions of dc_bubble, dc_cylinder and dc_linear whereas before they were omitted. -When saving a file with multiple embers in it, detect if time values are all the same and if so, start them at zero and increment by 1 for each ember. -Allow for numerous quality increases to be coalesced into one. It will pick up at the end of the current render. -Show selection highlight on variations tree in response to mouse hover. This makes it easier to see for which variation or param the current mouse wheel action will apply. -Make default temporal samples be 100, whereas before it was 1000 which was overkill. -Require the shift key to be held with delete for deleting an ember to prevent it from triggering when the user enters delete in the edit box. -This wasn't otherwise fixable without writing a lot more code. --Bug fixes -EmberGenome was crashing when generating a sequence from a source file with more than 2 embers in it. -EmberGenome was improperly handling the first frame of a merge after the last frame of the loop. -These bugs were due to a previous commit. Revert parts of that commit. -Prevent a zoom value of less than 0 when reading from xml. -Slight optimization of the crescents, and mask variations, if the compiler wasn't doing it already. -Unique file naming was broken because it was looking for _# and the default names ended with -#. -Disallow renaming of an ember in the library tree to an empty string. -Severe bug that prevented some variations from being read correctly from params generated outside this program. -Severe OpenCL randomization bug. The first x coordinates of the first points in the first kernel call of the first ember of a render since the OpenCL renderer object was created were not random and were mostly -1. -Severe bug when populating xform selection distributions that could sometimes cause a crash due to roundoff error. Fix by using double. -Limit the max number of variations in a random ember to MAX_CL_VARS, which is 8. This ensures they'll look the same on CPU and GPU. -Prevent user from saving stylesheet to default.qss, it's a special reserved filename. --Code changes -Generalize using the running sum output point inside of a variation for all cases: pre, reg and post. -Allow for array variables in variations where the address of each element is stored in m_Params. -Qualify all math functions with std:: -No longer use our own Clamp() in OpenCL, instead use the standard clamp(). -Redesign how functions are used in the variations OpenCL code. -Add tests to EmberTester to verify some of the new functionality. -Place more const and override qualifiers on functions where appropriate. -Add a global rand with a lock to be used very sparingly. -Use a map instead of a vector for bad param names in Xml parsing. -Prefix affine interpolation mode defines with "AFFINE_" to make their purpose more clear. -Allow for variations that change state during iteration by sending a separate copy of the ember to each rendering thread. -Implement this same functionality with a local struct in OpenCL. It's members are the total of all variables that need to change state within an ember. -Add Contains() function to Utils.h. -EmberRender: print names of kernels being printed with --dump_kernel option. -Clean up EmberTester to handle some of the recent changes. -Fix various casts. -Replace % 2 with & 1, even though the compiler was likely doing this already. -Add new file Variations06.h to accommodate new variations. -General cleanup.
2015-11-22 17:15:07 -05:00
/// <summary>
/// Thin wrapper around std::find_if() determine if a value exists at least once.
/// </summary>
/// <param name="container">The container to call find_if() on</param>
/// <param name="val">The value to search for</param>
/// <returns>True if the value was contained at least once, else false.</returns>
template<class c, class T>
static inline bool Contains(c& container, const T& val)
{
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
return std::find_if(container.begin(), container.end(), [&](const T & t) -> bool { return t == val; }) != container.end();
--User changes -Add new variations: bubbleT3D, crob, hexaplay3D, hexcrop, hexes, hexnix3D, loonie2, loonie3, nBlur, octapol and synth. -Allow for pre/post versions of dc_bubble, dc_cylinder and dc_linear whereas before they were omitted. -When saving a file with multiple embers in it, detect if time values are all the same and if so, start them at zero and increment by 1 for each ember. -Allow for numerous quality increases to be coalesced into one. It will pick up at the end of the current render. -Show selection highlight on variations tree in response to mouse hover. This makes it easier to see for which variation or param the current mouse wheel action will apply. -Make default temporal samples be 100, whereas before it was 1000 which was overkill. -Require the shift key to be held with delete for deleting an ember to prevent it from triggering when the user enters delete in the edit box. -This wasn't otherwise fixable without writing a lot more code. --Bug fixes -EmberGenome was crashing when generating a sequence from a source file with more than 2 embers in it. -EmberGenome was improperly handling the first frame of a merge after the last frame of the loop. -These bugs were due to a previous commit. Revert parts of that commit. -Prevent a zoom value of less than 0 when reading from xml. -Slight optimization of the crescents, and mask variations, if the compiler wasn't doing it already. -Unique file naming was broken because it was looking for _# and the default names ended with -#. -Disallow renaming of an ember in the library tree to an empty string. -Severe bug that prevented some variations from being read correctly from params generated outside this program. -Severe OpenCL randomization bug. The first x coordinates of the first points in the first kernel call of the first ember of a render since the OpenCL renderer object was created were not random and were mostly -1. -Severe bug when populating xform selection distributions that could sometimes cause a crash due to roundoff error. Fix by using double. -Limit the max number of variations in a random ember to MAX_CL_VARS, which is 8. This ensures they'll look the same on CPU and GPU. -Prevent user from saving stylesheet to default.qss, it's a special reserved filename. --Code changes -Generalize using the running sum output point inside of a variation for all cases: pre, reg and post. -Allow for array variables in variations where the address of each element is stored in m_Params. -Qualify all math functions with std:: -No longer use our own Clamp() in OpenCL, instead use the standard clamp(). -Redesign how functions are used in the variations OpenCL code. -Add tests to EmberTester to verify some of the new functionality. -Place more const and override qualifiers on functions where appropriate. -Add a global rand with a lock to be used very sparingly. -Use a map instead of a vector for bad param names in Xml parsing. -Prefix affine interpolation mode defines with "AFFINE_" to make their purpose more clear. -Allow for variations that change state during iteration by sending a separate copy of the ember to each rendering thread. -Implement this same functionality with a local struct in OpenCL. It's members are the total of all variables that need to change state within an ember. -Add Contains() function to Utils.h. -EmberRender: print names of kernels being printed with --dump_kernel option. -Clean up EmberTester to handle some of the recent changes. -Fix various casts. -Replace % 2 with & 1, even though the compiler was likely doing this already. -Add new file Variations06.h to accommodate new variations. -General cleanup.
2015-11-22 17:15:07 -05:00
}
0.4.1.5 Beta 11/28/2014 --User Changes Remove limit on the number of xforms allowable on the GPU. This was previously 21. Show actual strips count to be used in parens outside of user specified strips count on final render dialog. Allow for adjustment of iteration depth and fuse count per ember and save/read these values with the xml. Iteration optimizations on both CPU and GPU. Automatically adjust default quality spinner value when using CPU/GPU to 10/30, respectively. --Bug Fixes Fix severe randomization bug with OpenCL. Fix undo list off by one error when doing a new edit anywhere but the end of the undo list. Make integer variation parameters use 4 decimal places in the variations list like all the others. New build of the latest Qt to fix scroll bar drawing bug. Prevent grid from showing as much when pressing control to increase a spinner's increment speed. Still shows sometimes, but better than before. --Code Changes Pass count and fuse to iterator as a structure now to allow for passing more params in the future. Slightly different grid/block logic when running DE filtering on the GPU. Attempt a different way of doing DE, but #define out because it ended up not being faster. Restructure some things to allow for a variable length xforms buffer to be passed to the GPU. Add sub batch size and fuse count as ember members, and remove them from the renderer classes. Remove m_LastPass from Renderer. It should have been removed with passes. Pass seeds as a buffer to the OpenCL iteration kernel, rather than a single seed that gets modified. Slight optimization on CPU accum. Use case statement instead of if/else for xform chosing in OpenCL for a 2% speedup on params with large numbers of xforms. Add SizeOf() wrapper around sizeof(vec[0]) * vec.size(). Remove LogScaleSum() functions from the CPU and GPU because they're no longer used since passes were removed. Make some OpenCLWrapper getters const. Better ogranize RendererCL methods that return grid dimensions.
2014-11-28 04:37:51 -05:00
/// <summary>
/// Thin wrapper around computing the total size of a vector.
/// </summary>
/// <param name="vec">The vector to compute the size of</param>
/// <returns>The size of one element times the length.</returns>
template<typename T>
static inline size_t SizeOf(vector<T>& vec)
{
return sizeof(vec[0]) * vec.size();
}
/// <summary>
/// After a run completes, information about what was run can be saved as strings to the comments
/// section of a jpg or png file. This class is just a container for those values.
/// </summary>
class EMBER_API EmberImageComments
{
public:
2014-09-10 01:41:26 -04:00
/// <summary>
/// Empty destructor.
/// Needed to eliminate warnings about inlining.
/// </summary>
~EmberImageComments()
{
}
/// <summary>
/// Set all values to the empty string.
/// </summary>
void Clear()
{
m_Genome = "";
m_Badvals = "";
m_NumIters = "";
m_Runtime = "";
}
string m_Genome;
string m_Badvals;
string m_NumIters;
string m_Runtime;
};
/// <summary>
/// Since running is an incredibly complex process with multiple points of possible failure,
/// it's important that as much information as possible is captured if something goes wrong.
/// Classes wishing to capture this failure information will derive from this class and populate
/// the vector of strings with any useful error information. Note that a small complication can occur
/// when a class derives from this class, yet also has one or more members which do too. In that case, they should
/// override the methods to aggregate the error information from themselves, as well as their members.
/// </summary>
class EMBER_API EmberReport
{
public:
2014-09-10 01:41:26 -04:00
/// <summary>
/// Virtual destructor needed for virtual classes.
/// </summary>
virtual ~EmberReport() { }
2014-09-10 01:41:26 -04:00
/// <summary>
/// Write the entire error report as a single string to the console.
/// Derived classes with members that also derive from EmberReport should override this to capture
/// their error information as well as that of their members.
/// </summary>
virtual void DumpErrorReport() { cout << ErrorReportString(); }
/// <summary>
/// Clear the error report string vector.
/// Derived classes with members that also derive from EmberReport should override this to clear
/// their error information as well as that of their members.
/// </summary>
virtual void ClearErrorReport() { m_ErrorReport.clear(); }
/// <summary>
/// Return the entire error report as a single string.
/// Derived classes with members that also derive from EmberReport should override this to capture
/// their error information as well as that of their members.
/// </summary>
/// <returns>The entire error report as a single string. Empty if no errors.</returns>
virtual string ErrorReportString() { return StaticErrorReportString(m_ErrorReport); }
/// <summary>
/// Return the entire error report as a vector of strings.
/// Derived classes with members that also derive from EmberReport should override this to capture
/// their error information as well as that of their members.
/// </summary>
/// <returns>The entire error report as a vector of strings. Empty if no errors.</returns>
virtual vector<string> ErrorReport() { return m_ErrorReport; }
/// <summary>
/// Add string to report.
/// </summary>
/// <param name="s">The string to add</param>
virtual void AddToReport(const string& s) { if (!Contains(m_ErrorReport, s)) m_ErrorReport.push_back(s); }
/// <summary>
/// Add a vector of strings to report.
/// </summary>
/// <param name="vec">The vector of strings to add</param>
virtual void AddToReport(const vector<string>& vec) { for (auto& v : vec) AddToReport(v); }
2014-09-01 01:03:45 -04:00
/// <summary>
/// Static function to dump a vector of strings passed in.
/// </summary>
/// <param name="errorReport">The vector of strings to dump</param>
static void StaticDumpErrorReport(const vector<string>& errorReport) { cout << StaticErrorReportString(errorReport); }
2014-09-01 01:03:45 -04:00
/// <summary>
/// Static function to return the entire error report passed in as a single string.
/// </summary>
/// <param name="errorReport">The vector of strings to concatenate</param>
/// <returns>A string containing all strings in the vector passed in separated by newlines</returns>
static string StaticErrorReportString(const vector<string>& errorReport)
{
stringstream ss;
for (auto& s : errorReport) ss << s << "\n";
2014-09-01 01:03:45 -04:00
return ss.str();
}
private:
vector<string> m_ErrorReport;
};
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
/// <summary>
/// A base class for handling singletons that ensures only one instance exists, but
/// also deletes the instance after there are no more references to it.
/// This fixes the problem of the normal singleton pattern that uses a static function
/// variable. That pattern does not delete the instance until after main() exits
/// which can cause serious problems with certain libraries.
/// This class will delete before main exits.
/// Note that it still uses a local static variable because static templated
/// member variables cannot be exported across module boundaries.
/// Derived classes should inherit from this using the CRTP, and declare a friend to it.
/// They also should make their constructors private and destructors public.
/// Attribution: This class is a combination of
/// http://btorpey.github.io/blog/2014/02/12/shared-singletons/
/// and
/// http://enki-tech.blogspot.com/2012/08/c11-generic-singleton.html
/// </summary>
template <class T>
class Singleton
{
public:
/// <summary>
/// Create and return an instance of T.
/// </summary>
/// <param name="...args">The args to forward to the constructor of T</param>
/// <returns>A shared_ptr<T></returns>
template <typename... Args>
static shared_ptr<T> Instance(Args... args)
{
static weak_ptr<T> staticInstance;
auto temp = staticInstance.lock();
if (!temp)
{
temp.reset(new T(std::forward<Args>(args)...));
staticInstance = temp;
}
return temp;
}
};
//Use this if the body of the destructor will be implemented in a cpp file.
#define SINGLETON_DERIVED_DECL(x) \
friend class Singleton<x>; \
public: \
~x(); \
\
private: \
x(const x& other) = delete; \
const x& operator=(const x& other) = delete//Semicolon deliberately omitted to force it on the caller.
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
//Use this if the body of the destructor is empty and is will be implemented inline in the header file.
#define SINGLETON_DERIVED_IMPL(x) \
friend class Singleton<x>; \
public: \
~x(){} \
\
private: \
x(const x& other) = delete; \
const x& operator=(const x& other) = delete
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
/// <summary>
/// Open a file in binary mode and read its entire contents into a vector of bytes. Optionally null terminate.
/// </summary>
/// <param name="filename">The full path to the file to read</param>
/// <param name="buf">The vector which will be populated with the file's contents</param>
/// <param name="nullTerminate">Whether to append a NULL character as the last element of the vector. Needed when reading text files. Default: true.</param>
/// <returns>True if successfully read and populated, else false</returns>
static bool ReadFile(const char* filename, string& buf, bool nullTerminate = true)
{
bool b = false;
2014-09-10 01:41:26 -04:00
FILE* f = nullptr;
try
{
fopen_s(&f, filename, "rb");//Open in binary mode.
if (f)
{
struct _stat statBuf;
#if defined(_WIN32) || defined(__APPLE__)
int statResult = _fstat(f->_file, &statBuf);//Get data associated with file.
#else
int statResult = _fstat(f->_fileno, &statBuf);//Get data associated with file.
#endif
if (statResult == 0)//Check if statistics are valid.
{
2014-09-10 01:41:26 -04:00
buf.resize(statBuf.st_size + (nullTerminate ? 1 : 0));//Allocate vector to be the size of the entire file, with an optional additional character for nullptr.
if (buf.size() == static_cast<size_t>(statBuf.st_size + 1))//Ensure allocation succeeded.
{
size_t bytesRead = fread(&buf[0], 1, statBuf.st_size, f);//Read the entire file at once.
if (bytesRead == (static_cast<size_t>(statBuf.st_size)))//Ensure the number of bytes read matched what was requested.
{
2014-09-10 01:41:26 -04:00
if (nullTerminate)//Optionally nullptr terminate if they want to treat it as a string.
buf[buf.size() - 1] = 0;
b = true;//Success.
}
}
}
fclose(f);
f = nullptr;
}
}
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
catch (const std::exception& e)
{
cout << "Error: Reading file " << filename << " failed: " << e.what() << "\n";
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
b = false;
}
catch (...)
{
cout << "Error: Reading file " << filename << " failed.\n";
b = false;
}
if (f)
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
fclose(f);
return b;
}
/// <summary>
/// Clear dest and copy all of the elements of vector source with elements of type U to the vector
/// dest with elements of type T.
/// </summary>
/// <param name="dest">The vector of type T to copy to</param>
/// <param name="source">The vector of type U to copy from</param>
template <typename T, typename U>
static void CopyVec(vector<T>& dest, const vector<U>& source)
{
dest.clear();
dest.resize(source.size());
for (size_t i = 0; i < source.size(); i++)
dest[i] = static_cast<T>(source[i]);//Valid assignment operator between T and U types must be defined somewhere.
0.4.1.3 Beta 10/14/2014 --User Changes Size is no longer fixed to the window size. Size scaling is done differently in the final render dialog. This fixes several bugs. Remove Xml saving size from settings and options dialog, it no longer applies. Final render can be broken into strips. Set default save path to the desktop if none is found in the settings file. Set default output size to 1920x1080 if none is found in the settings file. --Bug Fixes Better memory size reporting in final render dialog. --Code Changes Migrate to C++11, Qt 5.3.1, and Visual Studio 2013. Change most instances of unsigned int to size_t, and int to intmax_t. Add m_OrigPixPerUnit and m_ScaleType to Ember for scaling purposes. Replace some sprintf_s() calls in XmlToEmber with ostringstream. Move more non-templated members into RendererBase. Add CopyVec() overload that takes a per element function pointer. Add vector Memset(). Replace '&' with '+' instead of "&amp;" in XmlToEmber for much faster parsing. Break strips rendering out into EmberCommon and call from EmberRender and Fractorium. Make AddAndWriteBuffer() just call WriteBuffer(). Make AddAndWriteImage() delete the existing image first before replacing it. Add SetOutputTexture() to RendererCL to support making new textures in response to resize events. Remove multiple return statements in RendererCL, and replace with a bool that tracks results. Add ToDouble(), MakeEnd(), ToString() and Exists() wrappers in Fractorium. Add Size() wrapper in EmberFile. Make QString function arguments const QString&, and string with const string&. Make ShowCritical() wrapper for invoking a message box from another thread. Add combo box to TwoButtonWidget and rename.
2014-10-14 11:53:15 -04:00
}
/// <summary>
/// Clear dest and copy all of the elements of vector source with elements of type U to the vector
/// dest with elements of type T.
/// Call a function on each element after it's been copied.
/// </summary>
/// <param name="dest">The vector of type T to copy to</param>
/// <param name="source">The vector of type U to copy from</param>
/// <param name="perElementOperation">A function to call on each element after it's copied</param>
template <typename T, typename U>
static void CopyVec(vector<T>& dest, const vector<U>& source, std::function<void(T& t)> perElementOperation)
{
dest.clear();
dest.resize(source.size());
for (size_t i = 0; i < source.size(); i++)
{
dest[i] = static_cast<T>(source[i]);//Valid assignment operator between T and U types must be defined somewhere.
0.4.1.3 Beta 10/14/2014 --User Changes Size is no longer fixed to the window size. Size scaling is done differently in the final render dialog. This fixes several bugs. Remove Xml saving size from settings and options dialog, it no longer applies. Final render can be broken into strips. Set default save path to the desktop if none is found in the settings file. Set default output size to 1920x1080 if none is found in the settings file. --Bug Fixes Better memory size reporting in final render dialog. --Code Changes Migrate to C++11, Qt 5.3.1, and Visual Studio 2013. Change most instances of unsigned int to size_t, and int to intmax_t. Add m_OrigPixPerUnit and m_ScaleType to Ember for scaling purposes. Replace some sprintf_s() calls in XmlToEmber with ostringstream. Move more non-templated members into RendererBase. Add CopyVec() overload that takes a per element function pointer. Add vector Memset(). Replace '&' with '+' instead of "&amp;" in XmlToEmber for much faster parsing. Break strips rendering out into EmberCommon and call from EmberRender and Fractorium. Make AddAndWriteBuffer() just call WriteBuffer(). Make AddAndWriteImage() delete the existing image first before replacing it. Add SetOutputTexture() to RendererCL to support making new textures in response to resize events. Remove multiple return statements in RendererCL, and replace with a bool that tracks results. Add ToDouble(), MakeEnd(), ToString() and Exists() wrappers in Fractorium. Add Size() wrapper in EmberFile. Make QString function arguments const QString&, and string with const string&. Make ShowCritical() wrapper for invoking a message box from another thread. Add combo box to TwoButtonWidget and rename.
2014-10-14 11:53:15 -04:00
perElementOperation(dest[i]);
}
}
/// <summary>
2014-09-10 01:41:26 -04:00
/// Clear a vector of pointers to any type by checking each element for nullptr and calling delete on it, then clearing the entire vector.
/// Optionally call array delete if the elements themselves are pointers to dynamically allocated arrays.
/// </summary>
/// <param name="vec">The vector to be cleared</param>
/// <param name="arrayDelete">Whether to call delete or delete []. Default: false.</param>
template <typename T>
static void ClearVec(vector<T*>& vec, bool arrayDelete = false)
{
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
for (size_t i = 0; i < vec.size(); i++)
{
if (vec[i])
{
if (arrayDelete)
delete [] vec[i];
else
delete vec[i];
}
2014-09-10 01:41:26 -04:00
vec[i] = nullptr;
}
vec.clear();
}
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
/// <summary>
/// Determine whether all elements in two containers are equal.
/// </summary>
/// <param name="c1">The first collection to compare</param>
/// <param name="c2">The second collection to compare</param>
/// <returns>True if the sizes and all elements in both collections are equal, else false.</returns>
template <typename T>
static bool Equal(const T& c1, const T& c2)
{
bool equal = c1.size() == c2.size();
if (equal)
{
for (auto it1 = c1.begin(), it2 = c2.begin(); it1 != c1.end(); ++it1, ++it2)
{
if (*it1 != *it2)
{
equal = false;
break;
}
}
}
return equal;
}
0.4.1.3 Beta 10/14/2014 --User Changes Size is no longer fixed to the window size. Size scaling is done differently in the final render dialog. This fixes several bugs. Remove Xml saving size from settings and options dialog, it no longer applies. Final render can be broken into strips. Set default save path to the desktop if none is found in the settings file. Set default output size to 1920x1080 if none is found in the settings file. --Bug Fixes Better memory size reporting in final render dialog. --Code Changes Migrate to C++11, Qt 5.3.1, and Visual Studio 2013. Change most instances of unsigned int to size_t, and int to intmax_t. Add m_OrigPixPerUnit and m_ScaleType to Ember for scaling purposes. Replace some sprintf_s() calls in XmlToEmber with ostringstream. Move more non-templated members into RendererBase. Add CopyVec() overload that takes a per element function pointer. Add vector Memset(). Replace '&' with '+' instead of "&amp;" in XmlToEmber for much faster parsing. Break strips rendering out into EmberCommon and call from EmberRender and Fractorium. Make AddAndWriteBuffer() just call WriteBuffer(). Make AddAndWriteImage() delete the existing image first before replacing it. Add SetOutputTexture() to RendererCL to support making new textures in response to resize events. Remove multiple return statements in RendererCL, and replace with a bool that tracks results. Add ToDouble(), MakeEnd(), ToString() and Exists() wrappers in Fractorium. Add Size() wrapper in EmberFile. Make QString function arguments const QString&, and string with const string&. Make ShowCritical() wrapper for invoking a message box from another thread. Add combo box to TwoButtonWidget and rename.
2014-10-14 11:53:15 -04:00
/// <summary>
/// Thin wrapper around passing a vector to memset() to relieve
/// the caller of having to pass the size.
/// </summary>
/// <param name="vec">The vector to memset</param>
/// <param name="val">The value to set each element to, default 0.</param>
template<typename T>
static inline void Memset(vector<T>& vec, int val = 0)
{
memset(static_cast<void*>(vec.data()), val, SizeOf(vec));
0.4.1.3 Beta 10/14/2014 --User Changes Size is no longer fixed to the window size. Size scaling is done differently in the final render dialog. This fixes several bugs. Remove Xml saving size from settings and options dialog, it no longer applies. Final render can be broken into strips. Set default save path to the desktop if none is found in the settings file. Set default output size to 1920x1080 if none is found in the settings file. --Bug Fixes Better memory size reporting in final render dialog. --Code Changes Migrate to C++11, Qt 5.3.1, and Visual Studio 2013. Change most instances of unsigned int to size_t, and int to intmax_t. Add m_OrigPixPerUnit and m_ScaleType to Ember for scaling purposes. Replace some sprintf_s() calls in XmlToEmber with ostringstream. Move more non-templated members into RendererBase. Add CopyVec() overload that takes a per element function pointer. Add vector Memset(). Replace '&' with '+' instead of "&amp;" in XmlToEmber for much faster parsing. Break strips rendering out into EmberCommon and call from EmberRender and Fractorium. Make AddAndWriteBuffer() just call WriteBuffer(). Make AddAndWriteImage() delete the existing image first before replacing it. Add SetOutputTexture() to RendererCL to support making new textures in response to resize events. Remove multiple return statements in RendererCL, and replace with a bool that tracks results. Add ToDouble(), MakeEnd(), ToString() and Exists() wrappers in Fractorium. Add Size() wrapper in EmberFile. Make QString function arguments const QString&, and string with const string&. Make ShowCritical() wrapper for invoking a message box from another thread. Add combo box to TwoButtonWidget and rename.
2014-10-14 11:53:15 -04:00
}
/// <summary>
/// System floor() extremely slow because it accounts for various error conditions.
/// This is a much faster version that works on data that is not NaN.
/// </summary>
/// <param name="x">The value to return the floor of</param>
/// <returns>The floored value</returns>
template <typename T>
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
static inline intmax_t Floor(T val)
{
if (val >= 0)
{
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
return static_cast<intmax_t>(val);
}
else
{
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
intmax_t i = static_cast<intmax_t>(val);//Truncate.
return i - (i > val);//Convert trunc to floor.
}
}
/// <summary>
/// Clamp and return a value to be greater than or equal to a specified minimum and less than
/// or equal to a specified maximum.
/// </summary>
/// <param name="val">The value to be clamped</param>
/// <param name="min">A value which the clamped value must be greater than or equal to</param>
/// <param name="max">A value which the clamped value must be less than or equal to</param>
/// <returns>The clamped value</returns>
template <typename T>
static inline T Clamp(T val, T min, T max)
{
if (val < min)
return min;
else if (val > max)
return max;
else
return val;
}
2016-03-04 22:20:30 -05:00
template <>
#ifdef _WIN32
static
#endif
float Clamp<float>(float val, float min, float max)
{
if (val < min)
return min;
else if (val > max)
return max;
else if (!std::isfinite(val))
return min;
else
return val;
}
template <>
#ifdef _WIN32
static
#endif
double Clamp<double>(double val, double min, double max)
{
if (val < min)
return min;
else if (val > max)
return max;
else if (!std::isfinite(val))
return min;
else
return val;
}
/// <summary>
/// Clamp and return a value to be greater than or equal to a specified minimum and less than
/// or equal to a specified maximum. If lesser, the value is fmod(val - min, max - min). If greater,
/// the value is max - fmod(max - val, max - min).
/// </summary>
/// <param name="val">The value to be clamped</param>
/// <param name="min">A value which the clamped value must be greater than or equal to</param>
/// <param name="max">A value which the clamped value must be less than or equal to</param>
/// <returns>The clamped and modded value</returns>
template <typename T>
static inline T ClampMod(T val, T min, T max)
{
if (val < min)
return min + fmod(val - min, max - min);
else if (val > max)
return max - fmod(max - val, max - min);
2016-03-04 22:20:30 -05:00
else if (!std::isfinite(val))
return min;
else
return val;
}
/// <summary>
/// Similar to Clamp(), but clamps a reference value in place rather than returning.
/// </summary>
/// <param name="val">The reference value to be clamped in place</param>
/// <param name="min">A value which the clamped value must be greater than or equal to</param>
/// <param name="max">A value which the clamped value must be less than or equal to</param>
template <typename T>
static inline void ClampRef(T& val, T min, T max)
{
if (val < min)
val = min;
else if (val > max)
val = max;
}
2016-03-04 22:20:30 -05:00
template <>
#ifdef _WIN32
static
#endif
void ClampRef<float>(float& val, float min, float max)
{
if (val < min)
val = min;
else if (val > max)
val = max;
else if (!std::isfinite(val))
val = min;
}
template <>
#ifdef _WIN32
static
#endif
void ClampRef<double>(double& val, double min, double max)
{
if (val < min)
val = min;
else if (val > max)
val = max;
else if (!std::isfinite(val))
val = min;
}
/// <summary>
/// Similar to Clamp(), but clamps a reference value in place rather than returning.
/// </summary>
/// <param name="val">The reference value to be clamped in place</param>
/// <param name="gte">A value which the clamped value must be less than or equal to</param>
template <typename T>
static inline void ClampLteRef(T& val, T lte)
{
if (val > lte)
val = lte;
}
2016-03-04 22:20:30 -05:00
template <>
#ifdef _WIN32
static
#endif
void ClampLteRef<float>(float& val, float lte)
{
if (val > lte || !std::isfinite(val))
val = lte;
}
template <>
#ifdef _WIN32
static
#endif
void ClampLteRef<double>(double& val, double lte)
{
if (val > lte || !std::isfinite(val))
val = lte;
}
/// <summary>
/// Clamp and return a value to be greater than or equal to a specified value.
/// Useful for ensuring something is not less than zero.
/// </summary>
/// <param name="val">The value to be clamped</param>
/// <param name="gte">A value which the clamped value must be greater than or equal to</param>
/// <returns>The clamped value</returns>
template <typename T>
static inline T ClampGte(T val, T gte)
{
return (val < gte) ? gte : val;
}
2016-03-04 22:20:30 -05:00
template <>
#ifdef _WIN32
static
#endif
float ClampGte<float>(float val, float gte)
{
if (val < gte || !std::isfinite(val))
return gte;
else
return val;
}
template <>
#ifdef _WIN32
static
#endif
double ClampGte<double>(double val, double gte)
{
if (val < gte || !std::isfinite(val))
return gte;
else
return val;
}
/// <summary>
/// Similar to Clamp(), but clamps a reference value in place rather than returning.
/// </summary>
/// <param name="val">The reference value to be clamped in place</param>
/// <param name="gte">A value which the clamped value must be greater than or equal to</param>
template <typename T>
static inline void ClampGteRef(T& val, T gte)
{
if (val < gte)
val = gte;
}
2016-03-04 22:20:30 -05:00
template <>
#ifdef _WIN32
static
#endif
void ClampGteRef<float>(float& val, float gte)
{
if (val < gte || !std::isfinite(val))
val = gte;
}
template <>
#ifdef _WIN32
static
#endif
void ClampGteRef<double>(double& val, double gte)
{
if (val < gte || !std::isfinite(val))
val = gte;
}
/// <summary>
/// Thin wrapper around a call to ClampGte() with a gte value of zero.
/// </summary>
/// <param name="val">The value to be clamped</param>
/// <returns>The clamped value</returns>
template <typename T>
static inline T ClampGte0(T val)
{
return ClampGte<T>(val, 0);
}
/// <summary>
/// Thin wrapper around a call to ClampGteRef() with a gte value of zero.
/// </summary>
/// <param name="val">The reference value to be clamped in place</param>
template <typename T>
static inline void ClampGte0Ref(T& val)
{
ClampGteRef<T>(val, 0);
}
/// <summary>
/// Return a value rounded up or down. Works for positive and negative numbers.
/// </summary>
/// <param name="r">The value to round</param>
/// <returns>The rounded value</returns>
template <typename T>
static inline T Round(T r)
{
return (r > 0) ? static_cast<T>(Floor<T>(r + T(0.5))) : ceil(r - T(0.5));
}
/// <summary>
/// Never really understood what this did.
/// </summary>
/// <param name="r">The value to round</param>
/// <returns>The rounded value</returns>
template <typename T>
static inline T Round6(T r)
{
r *= 1e6;
if (r < 0)
r -= 1;
return static_cast<T>(1e-6 * static_cast<int>(r + T(0.5)));
}
/// <summary>
/// Return the square of the passed in value.
/// This is useful when the value is a result of a computation
/// rather than a fixed number. Otherwise, use the SQR macro.
/// </summary>
/// <param name="v">The value to square</param>
/// <returns>The squared value</returns>
template <typename T>
static inline T Sqr(T t)
{
return t * t;
}
/// <summary>
2016-03-04 22:20:30 -05:00
/// Return the cube of the passed in value.
/// This is useful when the value is a result of a computation
/// rather than a fixed number. Otherwise, use the CUBE macro.
/// </summary>
2016-03-04 22:20:30 -05:00
/// <param name="v">The value to cube</param>
/// <returns>The cubed value</returns>
template <typename T>
2016-03-04 22:20:30 -05:00
static inline T Cube(T t)
{
2016-03-04 22:20:30 -05:00
return t * t * t;
}
template <typename T>
static inline T SafeTan(T x)
{
return x;
}
template <>
#ifdef _WIN32
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
static
#endif
float SafeTan<float>(float x)
{
--User changes -Add new variations: bubbleT3D, crob, hexaplay3D, hexcrop, hexes, hexnix3D, loonie2, loonie3, nBlur, octapol and synth. -Allow for pre/post versions of dc_bubble, dc_cylinder and dc_linear whereas before they were omitted. -When saving a file with multiple embers in it, detect if time values are all the same and if so, start them at zero and increment by 1 for each ember. -Allow for numerous quality increases to be coalesced into one. It will pick up at the end of the current render. -Show selection highlight on variations tree in response to mouse hover. This makes it easier to see for which variation or param the current mouse wheel action will apply. -Make default temporal samples be 100, whereas before it was 1000 which was overkill. -Require the shift key to be held with delete for deleting an ember to prevent it from triggering when the user enters delete in the edit box. -This wasn't otherwise fixable without writing a lot more code. --Bug fixes -EmberGenome was crashing when generating a sequence from a source file with more than 2 embers in it. -EmberGenome was improperly handling the first frame of a merge after the last frame of the loop. -These bugs were due to a previous commit. Revert parts of that commit. -Prevent a zoom value of less than 0 when reading from xml. -Slight optimization of the crescents, and mask variations, if the compiler wasn't doing it already. -Unique file naming was broken because it was looking for _# and the default names ended with -#. -Disallow renaming of an ember in the library tree to an empty string. -Severe bug that prevented some variations from being read correctly from params generated outside this program. -Severe OpenCL randomization bug. The first x coordinates of the first points in the first kernel call of the first ember of a render since the OpenCL renderer object was created were not random and were mostly -1. -Severe bug when populating xform selection distributions that could sometimes cause a crash due to roundoff error. Fix by using double. -Limit the max number of variations in a random ember to MAX_CL_VARS, which is 8. This ensures they'll look the same on CPU and GPU. -Prevent user from saving stylesheet to default.qss, it's a special reserved filename. --Code changes -Generalize using the running sum output point inside of a variation for all cases: pre, reg and post. -Allow for array variables in variations where the address of each element is stored in m_Params. -Qualify all math functions with std:: -No longer use our own Clamp() in OpenCL, instead use the standard clamp(). -Redesign how functions are used in the variations OpenCL code. -Add tests to EmberTester to verify some of the new functionality. -Place more const and override qualifiers on functions where appropriate. -Add a global rand with a lock to be used very sparingly. -Use a map instead of a vector for bad param names in Xml parsing. -Prefix affine interpolation mode defines with "AFFINE_" to make their purpose more clear. -Allow for variations that change state during iteration by sending a separate copy of the ember to each rendering thread. -Implement this same functionality with a local struct in OpenCL. It's members are the total of all variables that need to change state within an ember. -Add Contains() function to Utils.h. -EmberRender: print names of kernels being printed with --dump_kernel option. -Clean up EmberTester to handle some of the recent changes. -Fix various casts. -Replace % 2 with & 1, even though the compiler was likely doing this already. -Add new file Variations06.h to accommodate new variations. -General cleanup.
2015-11-22 17:15:07 -05:00
return std::tan(Clamp<float>(x, FLOAT_MIN_TAN, FLOAT_MAX_TAN));
}
template <>
#ifdef _WIN32
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
static
#endif
double SafeTan<double>(double x)
{
--User changes -Add new variations: bubbleT3D, crob, hexaplay3D, hexcrop, hexes, hexnix3D, loonie2, loonie3, nBlur, octapol and synth. -Allow for pre/post versions of dc_bubble, dc_cylinder and dc_linear whereas before they were omitted. -When saving a file with multiple embers in it, detect if time values are all the same and if so, start them at zero and increment by 1 for each ember. -Allow for numerous quality increases to be coalesced into one. It will pick up at the end of the current render. -Show selection highlight on variations tree in response to mouse hover. This makes it easier to see for which variation or param the current mouse wheel action will apply. -Make default temporal samples be 100, whereas before it was 1000 which was overkill. -Require the shift key to be held with delete for deleting an ember to prevent it from triggering when the user enters delete in the edit box. -This wasn't otherwise fixable without writing a lot more code. --Bug fixes -EmberGenome was crashing when generating a sequence from a source file with more than 2 embers in it. -EmberGenome was improperly handling the first frame of a merge after the last frame of the loop. -These bugs were due to a previous commit. Revert parts of that commit. -Prevent a zoom value of less than 0 when reading from xml. -Slight optimization of the crescents, and mask variations, if the compiler wasn't doing it already. -Unique file naming was broken because it was looking for _# and the default names ended with -#. -Disallow renaming of an ember in the library tree to an empty string. -Severe bug that prevented some variations from being read correctly from params generated outside this program. -Severe OpenCL randomization bug. The first x coordinates of the first points in the first kernel call of the first ember of a render since the OpenCL renderer object was created were not random and were mostly -1. -Severe bug when populating xform selection distributions that could sometimes cause a crash due to roundoff error. Fix by using double. -Limit the max number of variations in a random ember to MAX_CL_VARS, which is 8. This ensures they'll look the same on CPU and GPU. -Prevent user from saving stylesheet to default.qss, it's a special reserved filename. --Code changes -Generalize using the running sum output point inside of a variation for all cases: pre, reg and post. -Allow for array variables in variations where the address of each element is stored in m_Params. -Qualify all math functions with std:: -No longer use our own Clamp() in OpenCL, instead use the standard clamp(). -Redesign how functions are used in the variations OpenCL code. -Add tests to EmberTester to verify some of the new functionality. -Place more const and override qualifiers on functions where appropriate. -Add a global rand with a lock to be used very sparingly. -Use a map instead of a vector for bad param names in Xml parsing. -Prefix affine interpolation mode defines with "AFFINE_" to make their purpose more clear. -Allow for variations that change state during iteration by sending a separate copy of the ember to each rendering thread. -Implement this same functionality with a local struct in OpenCL. It's members are the total of all variables that need to change state within an ember. -Add Contains() function to Utils.h. -EmberRender: print names of kernels being printed with --dump_kernel option. -Clean up EmberTester to handle some of the recent changes. -Fix various casts. -Replace % 2 with & 1, even though the compiler was likely doing this already. -Add new file Variations06.h to accommodate new variations. -General cleanup.
2015-11-22 17:15:07 -05:00
return std::tan(x);
}
/// <summary>
/// Return EPS if the passed in value was zero, else return the value.
/// </summary>
/// <param name="x">The value</param>
/// <param name="y">The y distance</param>
/// <returns>EPS or the value if it was non-zero</returns>
template <typename T>
static inline T Zeps(T x)
{
return x == 0 ? EPS : x;
}
/// <summary>
/// Interpolate a given percentage between two values.
/// </summary>
/// <param name="a">The first value to interpolate between.</param>
/// <param name="b">The secod value to interpolate between.</param>
/// <param name="p">The percentage between the two values to calculate.</param>
/// <returns>The interpolated value.</returns>
template <typename T>
static inline T Lerp(T a, T b, T p)
{
return a + (b - a) * p;
}
/// <summary>
/// Thin wrapper around calling xmlStrcmp() on an Xml tag to tell
/// if its name is a given value.
/// </summary>
/// <param name="name">The name of the tag of the to inspect</param>
/// <param name="val">The value compare against</param>
/// <returns>True if the comparison matched, else false</returns>
static inline bool Compare(const xmlChar* name, const char* val)
{
return xmlStrcmp(name, XC(val)) != 0;
}
/// <summary>
/// Determine whether the specified value is very close to zero.
/// This is useful for determining equality of float/double types.
/// </summary>
/// <param name="val">The value to compare against</param>
/// <param name="tolerance">The tolerance. Default: 1e-6.</param>
/// <returns>True if the value was very close to zero, else false</returns>
template <typename T>
static inline bool IsNearZero(T val, T tolerance = 1e-6)
{
return (val > -tolerance && val < tolerance);
}
/// <summary>
/// Determine whether a specified value is very close to another value.
/// This is useful for determining equality of float/double types.
/// </summary>
/// <param name="val1">The first value.</param>
/// <param name="val2">The second value.</param>
/// <param name="tolerance">The tolerance. Default: 1e-6.</param>
/// <returns>True if the values were very close to each other, else false</returns>
template <typename T>
static inline bool IsClose(T val1, T val2, T tolerance = 1e-6)
{
return IsNearZero(val1 - val2, tolerance);
}
/// <summary>
/// Put an angular measurement in degrees into the range of -180 - 180.
/// </summary>
/// <param name="angle">The angle to normalize</param>
/// <returns>The normalized angle in a range of -180 - 180</returns>
template <typename T>
static inline T NormalizeDeg180(T angle)
{
auto a = fmod(angle, T(360));
if (a > 180)
a -= 360;
else if (a < -180)
a += 360;
return a;
}
/// <summary>
/// Return a lower case copy of a string.
/// </summary>
/// <param name="str">The string to copy and make lower case</param>
/// <returns>The lower case string</returns>
2014-09-10 01:41:26 -04:00
static string ToLower(const string& str)
{
string lower;
lower.resize(str.size());//Allocate the destination space.
std::transform(str.begin(), str.end(), lower.begin(), ::tolower);//Convert the source string to lower case storing the result in the destination string.
return lower;
}
/// <summary>
/// Return an upper case copy of a string.
/// </summary>
/// <param name="str">The string to copy and make upper case</param>
/// <returns>The upper case string</returns>
2014-09-10 01:41:26 -04:00
static string ToUpper(const string& str)
{
string upper;
upper.resize(str.size());//Allocate the destination space.
std::transform(str.begin(), str.end(), upper.begin(), ::toupper);//Convert the source string to lower case storing the result in the destination string.
return upper;
}
/// <summary>
/// Return a copy of a string with leading and trailing occurrences of a specified character removed.
/// The default character is a space.
/// </summary>
/// <param name="str">The string to trim</param>
/// <param name="ch">The character to trim. Default: space.</param>
/// <returns>The trimmed string</returns>
0.4.1.3 Beta 10/14/2014 --User Changes Size is no longer fixed to the window size. Size scaling is done differently in the final render dialog. This fixes several bugs. Remove Xml saving size from settings and options dialog, it no longer applies. Final render can be broken into strips. Set default save path to the desktop if none is found in the settings file. Set default output size to 1920x1080 if none is found in the settings file. --Bug Fixes Better memory size reporting in final render dialog. --Code Changes Migrate to C++11, Qt 5.3.1, and Visual Studio 2013. Change most instances of unsigned int to size_t, and int to intmax_t. Add m_OrigPixPerUnit and m_ScaleType to Ember for scaling purposes. Replace some sprintf_s() calls in XmlToEmber with ostringstream. Move more non-templated members into RendererBase. Add CopyVec() overload that takes a per element function pointer. Add vector Memset(). Replace '&' with '+' instead of "&amp;" in XmlToEmber for much faster parsing. Break strips rendering out into EmberCommon and call from EmberRender and Fractorium. Make AddAndWriteBuffer() just call WriteBuffer(). Make AddAndWriteImage() delete the existing image first before replacing it. Add SetOutputTexture() to RendererCL to support making new textures in response to resize events. Remove multiple return statements in RendererCL, and replace with a bool that tracks results. Add ToDouble(), MakeEnd(), ToString() and Exists() wrappers in Fractorium. Add Size() wrapper in EmberFile. Make QString function arguments const QString&, and string with const string&. Make ShowCritical() wrapper for invoking a message box from another thread. Add combo box to TwoButtonWidget and rename.
2014-10-14 11:53:15 -04:00
static string Trim(const string& str, char ch = ' ')
{
string ret;
if (str != "")
{
size_t firstChar = str.find_first_not_of(ch);
size_t lastChar = str.find_last_not_of(ch);
2014-09-01 01:03:45 -04:00
if (firstChar == string::npos)
firstChar = 0;
if (lastChar == string::npos)
lastChar = str.size();
ret = str.substr(firstChar, lastChar - firstChar + 1);
}
return ret;
}
/// <summary>
/// Return a copy of a file path string with the path portion removed.
/// </summary>
/// <param name="filename">The string to retrieve the path from</param>
/// <returns>The path portion of the string</returns>
static string GetPath(const string& filename)
{
string s;
const size_t lastSlash = filename.find_last_of("\\/");
if (std::string::npos != lastSlash)
s = filename.substr(0, lastSlash + 1);
else
s = "";
return s;
}
/// <summary>
/// Placeholder for a templated function to query the value of a specified system environment variable
/// of a specific type. This function does nothing as the functions for specific types implement the behavior
/// via template specialization.
/// </summary>
/// <param name="name">The name of the environment variable to query</param>
/// <param name="def">The default value to return if the environment variable was not present</param>
/// <returns>The value of the specified environment variable if found, else default</returns>
template <typename T>
static inline T Arg(char* name, T def)
{
char* ch;
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
T returnVal;
2016-03-04 22:20:30 -05:00
#ifdef _WIN32
2014-09-10 01:41:26 -04:00
size_t len;
errno_t err = _dupenv_s(&ch, &len, name);
#else
int err = 1;
ch = getenv(name);
#endif
if (err || !ch)
returnVal = def;
else
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
{
T tempVal;
istringstream istr(ch);
istr >> tempVal;
if (!istr.bad() && !istr.fail())
returnVal = tempVal;
else
returnVal = def;
}
2016-03-04 22:20:30 -05:00
#ifdef _WIN32
free(ch);
#endif
return returnVal;
}
/// <summary>
/// Template specialization for Arg<>() with a type of bool.
/// </summary>
/// <param name="name">The name of the environment variable to query</param>
/// <param name="def">The default value to return if the environment variable was not present</param>
/// <returns>The value of the specified environment variable if found, else default</returns>
template <>
#ifdef _WIN32
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
static
#endif
bool Arg<bool>(char* name, bool def)
{
return (Arg<int>(name, -999) != -999) ? true : def;
}
/// <summary>
/// Template specialization for Arg<>() with a type of string.
/// </summary>
/// <param name="name">The name of the environment variable to query</param>
/// <param name="def">The default value to return if the environment variable was not present</param>
/// <returns>The value of the specified environment variable if found, else default</returns>
template <>
#ifdef _WIN32
--User changes -Add new variations: crackle, dc_perlin. -Make default palette interp mode be linear instead of step. -Make summary tab the selected one in the Info tab. -Allow for highlight power of up to 10. It was previously limited to 2. --Bug fixes -Direct color calculations were wrong. -Flattening was not applied to final xform. -Fix "pure virtual function call" error on shutdown. --Code changes -Allow for array precalc params in variations by adding a size member to the ParamWithName class. -In IterOpenCLKernelCreator, memcpy precalc params instead of a direct assign since they can now be of variable length. -Add new file VarFuncs to consolidate some functions that are common to multiple variations. This also contains texture data for crackle and dc_perlin. -Place OpenCL versions of these functions in the FunctionMapper class in the EmberCL project. -Add new Singleton class that uses CRTP, is thread safe, and deletes after the last reference goes away. This fixes the usual "delete after main()" problem with singletons that use the static local function variable pattern. -Began saving files with AStyle autoformatter turned on. This will eventually touch all files as they are worked on. -Add missing backslash to CUDA include and library paths for builds on Nvidia systems. -Add missing gl.h include for Windows. -Remove glew include paths from Fractorium, it's not used. -Remove any Nvidia specific #defines and build targets, they are no longer needed with OpenCL 1.2. -Fix bad paths on linux build. -General cleanup.
2015-12-31 16:41:59 -05:00
static
#endif
string Arg<string>(char* name, string def)
{
char* ch;
string returnVal;
2016-03-04 22:20:30 -05:00
#ifdef _WIN32
2014-09-10 01:41:26 -04:00
size_t len;
errno_t err = _dupenv_s(&ch, &len, name);
#else
int err = 1;
ch = getenv(name);
#endif
if (err || !ch)
{
if (def != "")
returnVal = def;
}
else
returnVal = string(ch);
2016-03-04 22:20:30 -05:00
#ifdef _WIN32
free(ch);
#endif
return returnVal;
}
/// <summary>
/// Replaces all instances of a value within a collection, with the specified value.
/// Taken from a StackOverflow.com post.
/// Modified to account for the scenario where the find and replace strings each start with
/// the same character.
/// Template argument should be any STL container.
/// </summary>
/// <param name="source">Collection to replace values in</param>
/// <param name="find">The value to replace</param>
/// <param name="replace">The value to replace with</param>
/// <returns>The number of instances replaced</returns>
template<typename T>
static uint FindAndReplace(T& source, const T& find, const T& replace)
{
uint replaceCount = 0;
typename T::size_type fLen = find.size();
typename T::size_type rLen = replace.size();
for (typename T::size_type pos = 0; (pos = source.find(find, pos)) != T::npos; pos += rLen)
{
typename T::size_type pos2 = source.find(replace, pos);
if (pos != pos2)
{
replaceCount++;
source.replace(pos, fLen, replace);
}
}
return replaceCount;
}
--User changes -Add support for multiple GPU devices. --These options are present in the command line and in Fractorium. -Change scheme of specifying devices from platform,device to just total device index. --Single number on the command line. --Change from combo boxes for device selection to a table of all devices in Fractorium. -Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Bug fixes -EmberAnimate, EmberRender, FractoriumSettings, FinalRenderDialog: Fix wrong order of arguments to Clamp() when assigning thread priority. -VariationsDC.h: Fix NVidia OpenCL compilation error in DCTriangleVariation. -FractoriumXformsColor.cpp: Checking for null pixmap pointer is not enough, must also check if the underlying buffer is null via call to QPixmap::isNull(). --Code changes -Ember.h: Add case for FLAME_MOTION_NONE and default in ApplyFlameMotion(). -EmberMotion.h: Call base constructor. -EmberPch.h: #pragma once only on Windows. -EmberToXml.h: --Handle different types of exceptions. --Add default cases to ToString(). -Isaac.h: Remove unused variable in constructor. -Point.h: Call base constructor in Color(). -Renderer.h/cpp: --Add bool to Alloc() to only allocate memory for the histogram. Needed for multi-GPU. --Make CoordMap() return a const ref, not a pointer. -SheepTools.h: --Use 64-bit types like the rest of the code already does. --Fix some comment misspellings. -Timing.h: Make BeginTime(), EndTime(), ElapsedTime() and Format() be const functions. -Utils.h: --Add new functions Equal() and Split(). --Handle more exception types in ReadFile(). --Get rid of most legacy blending of C and C++ argument parsing. -XmlToEmber.h: --Get rid of most legacy blending of C and C++ code from flam3. --Remove some unused variables. -EmberAnimate: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --If a render fails, exit since there is no point in continuing an animation with a missing frame. --Pass variables to threaded save better, which most likely fixes a very subtle bug that existed before. --Remove some unused variables. -EmberGenome, EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. -EmberRender: --Support multi-GPU processing that alternates full frames between devices. --Use OpenCLInfo instead of OpenCLWrapper for --openclinfo option. --Remove bucketT template parameter, and hard code float in its place. --Only print values when not rendering with OpenCL, since they're always 0 in that case. -EmberCLPch.h: --#pragma once only on Windows. --#include <atomic>. -IterOpenCLKernelCreator.h: Add new kernel for summing two histograms. This is needed for multi-GPU. -OpenCLWrapper.h: --Move all OpenCL info related code into its own class OpenCLInfo. --Add members to cache the values of global memory size and max allocation size. -RendererCL.h/cpp: --Redesign to accomodate multi-GPU. --Constructor now takes a vector of devices. --Remove DumpErrorReport() function, it's handled in the base. --ClearBuffer(), ReadPoints(), WritePoints(), ReadHist() and WriteHist() now optionally take a device index as a parameter. --MakeDmap() override and m_DmapCL member removed because it no longer applies since the histogram is always float since the last commit. --Add new function SumDeviceHist() to sum histograms from two devices by first copying to a temporary on the host, then a temporary on the device, then summing. --m_Calls member removed, as it's now per-device. --OpenCLWrapper removed. --m_Seeds member is now a vector of vector of seeds, to accomodate a separate and different array of seeds for each device. --Added member m_Devices, a vector of unique_ptr of RendererCLDevice. -EmberCommon.h --Added Devices() function to convert from a vector of device indices to a vector of platform,device indices. --Changed CreateRenderer() to accept a vector of devices to create a single RendererCL which will split work across multiple devices. --Added CreateRenderers() function to accept a vector of devices to create multiple RendererCL, each which will render on a single device. --Add more comments to some existing functions. -EmberCommonPch.h: #pragma once only on Windows. -EmberOptions.h: --Remove --platform option, it's just sequential device number now with the --device option. --Make --out be OPT_USE_RENDER instead of OPT_RENDER_ANIM since it's an error condition when animating. It makes no sense to write all frames to a single image. --Add Devices() function to parse comma separated --device option string and return a vector of device indices. --Make int and uint types be 64-bit, so intmax_t and size_t. --Make better use of macros. -JpegUtils.h: Make string parameters to WriteJpeg() and WritePng() be const ref. -All project files: Turn off buffer security check option in Visual Studio (/Gs-) -deployment.pri: Remove the line OTHER_FILES +=, it's pointless and was causing problems. -Ember.pro, EmberCL.pro: Add CONFIG += plugin, otherwise it wouldn't link. -EmberCL.pro: Add new files for multi-GPU support. -build_all.sh: use -j4 and QMAKE=${QMAKE:/usr/bin/qmake} -shared_settings.pri: -Add version string. -Remove old DESTDIR definitions. -Add the following lines or else nothing would build: CONFIG(release, debug|release) { CONFIG += warn_off DESTDIR = ../../../Bin/release } CONFIG(debug, debug|release) { DESTDIR = ../../../Bin/debug } QMAKE_POST_LINK += $$quote(cp --update ../../../Data/flam3-palettes.xml $${DESTDIR}$$escape_expand(\n\t)) LIBS += -L/usr/lib -lpthread -AboutDialog.ui: Another futile attempt to make it look correct on Linux. -FinalRenderDialog.h/cpp: --Add support for multi-GPU. --Change from combo boxes for device selection to a table of all devices. --Ensure device selection makes sense. --Remove "FinalRender" prefix of various function names, it's implied given the context. -FinalRenderEmberController.h/cpp: --Add support for multi-GPU. --Change m_FinishedImageCount to be atomic. --Move CancelRender() from the base to FinalRenderEmberController<T>. --Refactor RenderComplete() to omit any progress related functionality or image saving since it can be potentially ran in a thread. --Consolidate setting various renderer fields into SyncGuiToRenderer(). -Fractorium.cpp: Allow for resizing of the options dialog to show the entire device table. -FractoriumCommon.h: Add various functions to handle a table showing the available OpenCL devices on the system. -FractoriumEmberController.h/cpp: Remove m_FinalImageIndex, it's no longer needed. -FractoriumRender.cpp: Scale the interactive sub batch count and quality by the number of devices used. -FractoriumSettings.h/cpp: --Temporal samples defaults to 100 instead of 1000 which was needless overkill. --Add multi-GPU support, remove old device,platform pair. -FractoriumToolbar.cpp: Disable OpenCL toolbar button if there are no devices present on the system. -FractoriumOptionsDialog.h/cpp: --Add support for multi-GPU. --Consolidate more assignments in DataToGui(). --Enable/disable CPU/OpenCL items in response to OpenCL checkbox event. -Misc: Convert almost everything to size_t for unsigned, intmax_t for signed.
2015-09-12 21:33:45 -04:00
/// <summary>
/// Split a string into tokens and place them in a vector.
/// </summary>
/// <param name="str">The string to split</param>
/// <param name="del">The delimiter to split the string on</param>
/// <returns>The split strings, each as an element in a vector.</returns>
static vector<string> Split(const string& str, char del)
{
string tok;
vector<string> vec;
stringstream ss(str);
while (getline(ss, tok, del))
vec.push_back(tok);
return vec;
}
/// <summary>
/// Return a character pointer to a version string composed of the EMBER_OS and EMBER_VERSION values.
/// </summary>
static inline const char* EmberVersion()
{
return EMBER_OS "-" EMBER_VERSION;
}
2014-09-01 01:03:45 -04:00
}