-Fix OpenCL compilation bugs in a few variations.
--Code changes
-Pre/post variations are now checked for precalcs when creating the OpenCL kernel code.
-Change some enumeration t
-Fix variations: blob2 (broken on CPU), epispiral, hole.
-Fix reading variations from Apophysis: supershape.
-Bump render was broken.
--Code changes
-Flip precalc sina/cosa and apply everywhere by flipping the usage. Flam3 had these reversed and it made the code confusing to read.
-Improve performance in the following variations: cpow2, dc_cube, julia3d, julia3dz, julian2, log_db, nblur, npolar, waffle, wavesn, xtrb.
--Code changes
-Rand range now uses multiply + shift rather than modulo.
-Fix some potential OpenCL compilation bugs on circlecrop, circlecrop2, oscilloscope2, Truchet_hex_crop.
-Prevent the minus key from changing the current xform when being pressed in a textbox.
--Code changes
-Cleanup some casting in depth_blur, depth_blur2.
-Fix xform selection logic to prevent selecting hidden pre and post xforms.
-Add hex_modulus.
--Bug fixes
-starblur was wrong.
--Code changes
-Optimize Truchet_hex_crop, Truchet_hex_fill.
-Cleanup Truchet_inv.
-Add new file Variations08.h, and move Gnarly and inkdrop there.
-cosh, coth, csch, sech, sinh, tanh: Scale inputs by PI/4. This will produce different results, but is technically more correct.
--Code changes
-cos, csch: move position of sign flip, shouldn't change output.
-cot, coth, csc, csch, sec, sech, tan, tanh: add optimization.
-Undo list length increased from 128 to 512.
--Code changes
-auguer doesn't need Zeps().
-Additional check on undo list length when adding in certain circumstances.
-Add gnarly variation.
--Bug fixes
-Fix reading of post variations in .chaos files.
-Make selection of points on color curves control apply only to the current selection as specified by the radio buttons below.
--Code changes
-Use std::complex<T> type in some variations' CPU code.
-mirror_x, y and z variations were totally wrong.
-Reading color curves from older version 2 .chaos files which did not have the "knots" and "values" names was broken.
-Add new variations waves22, waves23, waves42, waves3 and waves4 from user tatasz.
-Add new stylesheet called lightdark.qss which gives a more modern look to the dark theme. Started by Michel Mastriani (triptychaos).
--Included in the qmake and Wix installers.
--Code changes
-Add a new C# project that attempts to convert Apophysis plugins to Fractorium style Variation classes. It's not entirely perfect, but gets most of the job done much more quickly than doing so manually.
-Remove unused OpenCL functions from variations: elliptic, poincare, mask, bMod, bSwirl, bTransform, bCollide, farblur, popcorn2_3D, falloff, falloff2, falloff3, crackle2, waves2b, hypercrop, depth_gaussian2, depth_sine, depth_sine2, dust, asteria, vibration, vibration2, arctanh, smartshape, squares, starblur2, Truchet,.
-Add code in EmberTester to automatically detect such unused functions.
-Clear all color curves when clicking Reset while holding down Ctrl.
-Interpolate color curves when generating a sequence.
--Bug fixes
-Undo a change made last year which gave the wrong color index for final xforms when generating a sequence.
--Code changes
-No longer assume palettes are 256 elements. Can now read longer palettes.
-Ensure OpenCL images always get written when created.
-Clear all color curves when clicking Reset while holding down Ctrl.
--Code changes
-No longer assume palettes are 256 elements. Can now read and write longer palettes.
-Ensure OpenCL images always get written when created.
-Show common folder locations such as documents, downloads, pictures in the sidebar in all file dialogs.
-Warning message about exceeding memory in final render dialog now suggests strips as the solution to the problem.
-Strips now has a tooltip explaining what it does.
-Allow more digits in the spinners on the color section the flame tab.
-Add manually adjustable size spinners in the final render dialog. Percentage scale and absolute size are fully synced.
-Default prefix in final render is now the filename when doing animations (coming from sequence section of the library tab).
-Changed the elliptic variation back to using a less precise version for float, and a more precise version for double. The last release had it always using double.
-New applied xaos table that shows a read-only view of actual weights by taking the base xform weights and multiplying them by the xaos values.
-New table in the xaos tab that gives a graphical representation of the probability that each xform is chosen, with and without xaos.
-Add button to transpose the xaos rows and columns.
-Add support for importing .chaos files from Chaotica.
--Pasting back to Chaotica will work for most, but not all, variations due to incompatible parameter names in some.
-Curves are now splines instead of Bezier. This adds compatibility with Chaotica, but breaks it for Apophysis. Xmls are still pastable, but the color curves will look different.
--The curve editor on the palette tab can now add points by clicking on the lines and remove points by clicking on the points themselves, just like Chaotica.
--Splines are saved in four new xml fields: overall_curve, red_curve, green_curve and blue_curve.
-Allow for specifying the percentage of a sub batch each thread should iterate through per kernel call when running with OpenCL. This gives a roughly 1% performance increase due to having to make less kernel calls while iterating.
--This field is present for interactive editing (where it's not very useful) and in the final render dialog.
--On the command line, this is specified as --sbpctth for EmberRender and EmberAnimate.
-Allow double clicking to toggle the supersample field in the flame tab between 1 and 2 for easily checking the effect of the field.
-When showing affine values as polar coordinates, show angles normalized to 360 to match Chaotica.
-Fuse Count spinner now toggles between 15 and 100 when double clicking for easily checking the effect of the field.
-Added field for limiting the range in the x and y direction that the initial points are chosen from.
-Added a field called K2 which is an alternative way to set brightness, ignored when zero.
--This has no effect for many variations, but hs a noticeable effect for some.
-Added new variations:
arcsech
arcsech2
arcsinh
arctanh
asteria
block
bwraps_rand
circlecrop2
coth_spiral
crackle2
depth_blur
depth_blur2
depth_gaussian
depth_gaussian2
depth_ngon
depth_ngon2
depth_sine
depth_sine2
dragonfire
dspherical
dust
excinis
exp2
flipx
flowerdb
foci_p
gaussian
glynnia2
glynnsim4
glynnsim5
henon
henon
hex_rand
hex_truchet
hypershift
lazyjess
lens
lozi
lozi
modulusx
modulusy
oscilloscope2
point_symmetry
pointsymmetry
projective
pulse
rotate
scry2
shift
smartshape
spher
squares
starblur2
swirl3
swirl3r
tanh_spiral
target0
target2
tile_hlp
truchet_glyph
truchet_inv
truchet_knot
unicorngaloshen
vibration
vibration2
--hex_truchet, hex_rand should always use double. They are extremely sensitive.
--Bug fixes:
-Bounds sign was flipped for x coordinate of world space when center was not zero.
-Right clicking and dragging spinner showed menu on mouse up, even if it was very far away.
-Text boxes for size in final render dialog were hard to type in. Same bug as xform weight used to be so fix the same way.
-Fix spelling to be plural in toggle color speed box.
-Stop using the blank user palette to generate flames. Either put colored palettes in it, or exclude it from randoms.
-Clicking the random palette button for a palette file with only one palette in it would freeze the program.
-Clicking none scale in final render did not re-render the preview.
-Use less precision on random xaos. No need for 12 decimal places.
-The term sub batch is overloaded in the options dialog. Change the naming and tooltip of those settings for cpu and opencl.
--Also made clear in the tooltip for the default opencl quality setting that the value is per device.
-The arrows spinner in palette editor appears like a read-only label. Made it look like a spinner.
-Fix border colors for various spin boxes and table headers in the style sheet. Requires reload.
-Fix a bug in the bwraps variation which would produce different results than Chaotica and Apophysis.
-Synth was allowed to be selected for random flame generation when using an Nvidia card but it shouldn't have been because Nvidia has a hard time compiling synth.
-A casting bug in the OpenCL kernels for log scaling and density filtering was preventing successful compilations on Intel iGPUs. Fixed even though we don't support anything other than AMD and Nvidia.
-Palette rotation (click and drag) position was not being reset when loading a new flame.
-When the xform circles were hidden, opening and closing the options dialog would improperly reshow them.
-Double click toggle was broken on integer spin boxes.
-Fixed tab order of some controls.
-Creating a palette from a jpg in the palette editor only produced a single color.
--Needed to package imageformats/qjpeg.dll with the Windows installer.
-The basic memory benchmark test flame was not really testing memory. Make it more spread out.
-Remove the temporal samples field from the flame tab, it was never used because it's only an animation parameter which is specified in the final render dialog or on the command line with EmberAnimate.
--Code changes:
-Add IsEmpty() to Palette to determine if a palette is all black.
-Attempt to avoid selecting a blank palette in PaletteList::GetRandomPalette().
-Add function ScanForChaosNodes() and some associated helper functions in XmlToEmber.
-Make variation param name correction be case insensitive in XmlToEmber.
-Report error when assigning a variation param value in XmlToEmber.
-Add SubBatchPercentPerThread() method to RendererCL.
-Override enterEvent() and leaveEvent() in DoubleSpinBox and SpinBox to prevent the context menu from showing up on right mouse up after already leaving the spinner.
-Filtering the mouse wheel event in TableWidget no longer appears to be needed. It was probably an old Qt bug that has been fixed.
-Gui/ember syncing code in the final render dialog needed to be reworked to accommodate absolute sizes.
-Disable Start button in final render dialog when Pause is clicked.
--Bug fixes
-Rapidly changing spinner values was causing the OpenCL renderer to report a failure, when it was really just aborting.
--Code changes
-Renderers never internally set abort to true due to a failure. Abort is only set to true by the calling code.
-Add a button to swap the pre and post affine values for all selected xforms.
--Bug fixes
-Remove the ability to change spinner values with +=-=, it was conflicting with other things and added no real value.
-All file dialog opening in Linux would freeze. No longer using native file dialogs, they are broken.
-Set default open path to the desktop if there is no settings file present, which will be the case on the first run.
-Amphibole_Supergroup.ugr palette had an invalid character in two of the palette names.
--Code changes
-Change some table header padding styles to work with new Qt. Qss reload is required.
-Ensure the open folder path setting always has a valid string in it before opening a folder.
